1,Ventilation should be good. The operation of energy-saving lamps will be affected by the room temperature, the temperature is too high will make the light down, trigger ignition process will have difficulties. Therefore, to avoid installing it in a sealed place, lighting, lamp shade should be well-ventilated, so as to avoid the temperature due to the heat can not be emitted and continue to rise, affecting energy-saving performance.
2, Bulb weight should not exceed the lamp holder load. Energy-saving lamps (especially the old type of inductive) larger than the average tungsten filament bulbs heavier, so switch to energy-saving lamps should pay attention to the size of the lampshade or lighting with. At the same time also pay attention to the lamp holder, especially the multi-bulb type lighting, can support the weight of the bulb.
If it is found that the lamp holder is loose, it must be replaced or repaired immediately.
3, Due to different working principles, can not be directly used for energy-saving lamps dimming incandescent system (such as dimming lamps, etc.). Another particular note is that when installing energy-saving lamps, do not hold the lamp, so as to avoid damage.