1. The first fixed wall with a percussion drill two fixed hole drilling, plug rubber stopper. (Pitch less than the stent length)
2. Use a wooden tooth screw to fasten the fixing clip for the mounting bracket to the hole where the rubber plug is plugged.
3. Fasten the lamp holder onto the clip and fasten it. Install the lamp on the bracket with the shiny side turned outwards.
Connect the two lines of the 8-pin plug to the L and N lines of the mains.
5. Lamp for more than a series can be connected with the column to connect the lamp, pay attention to the end of the place to prevent touch electric shock is best covered with plug cover.