T8蛍光管
- Linear Lamp Geometry: The extended tube format suits luminaires designed to provide an even line of general interior light.
- Routine Replacement: A removable source can be exchanged while the matched luminaire stays installed.
- Established Fixture Format: The T8 identity provides a clear starting point when maintaining compatible linear-light installations.
| Core Technology | 蛍光灯 |
|---|---|
| Purchase Form | Single replaceable unit |
| Reference Basis | 完全なT8注文コード |
|---|---|
| System Review | 接続間隔、制御機器、電源および有効長 |
Technical Specifications
Model Specifications
| モデル | Tube Dia. × Overall Length | Cap | Rated Power | Total Lumen | CCT |
|---|---|---|---|---|---|
| XGYT8-E10 | Φ26 × 331 mm | G13 | 10 W | 550–650 lm | 2700–6500 K |
| XGYT8-E15 | Φ26 × 437.4 mm | G13 | 15 W | 1200–1250 lm | 2700–6500 K |
| XGYT8-E18 | Φ26 × 589.4 mm | G13 | 18 W | 1450–1550 lm | 2700–6500 K |
| XGYT8-E30 | Φ26 × 897.6 mm | G13 | 30 W | 2300–2550 lm | 2700–6500 K |
| XGYT8-E36 | Φ26 × 1199.4 mm | G13 | 36 W | 2900–3200 lm | 2700–6500 K |
| XGYT8-E58 | Φ26 × 1500 mm | G13 | 58 W | 4000–4700 lm | 2700–6500 K |
Product Description
Product Details
Product Construction
各製品は、対応する照明器具内で交換可能な光源となる直管蛍光ランプです。ランプホルダー、点灯装置、器具本体は照明システムの別部品です。
Selection & Installation Notes
完全な注文コードを使用して、物理的な長さ、接点間隔、電気要件を対象器具と照合してください。設置前に、承認済みの点灯装置、回路構成、および別途スターターが必要かどうかを確認してください。当社の関連製品を比較するには linear fluorescent tube range.
Recommended Application
用途
- Office Linear Fixtures: Use the selected tube in compatible luminaires serving desks, meeting rooms and circulation areas.
- Retail Service Areas: 承認済みの参照品を、対応するバックヤードおよび補助エリアの照明に取り付けてください。
- Commercial Stockrooms: Use matched fluorescent tubes in suitable linear fixtures serving storage aisles and work areas.
- Maintenance Relamping: Replace an existing tube after matching the fixture length, holders and operating system.
Frequently Asked Questions?
製品仕様、モデル選定、用途、見積要件に関するよくある質問への明確な回答をご確認ください。プロジェクト固有の要件については、対象市場、必要数量、主要仕様をお送りください。
対応照明器具用の交換可能な直管形蛍光ランプです。交換品の選定には完全な管の品番を使用してください。
いいえ。正確な品番を、確認済みの管長、電気定格および器具のその他の要件に適合させてください。
直接接続できると想定しないでください。正確な管および照明器具に承認された点灯装置と回路構成のみを使用してください。
完全な注文コード、全長、ホルダー間隔、点灯装置および電気要件を既存設備と比較してください。
The tube is supplied as the replaceable lamp. Confirm any separate starter, ballast, holders or fixture components required by the intended system.
Confirm the complete tube reference, approved product specification, marking, labels and packaging against the agreed sample before production.







