How do M1 and M2 operate?

M1 keeps the light continuously on. M2 combines darkness detection with infrared motion sensing for night-time response.

Does each Z0-LED model support stepless dimming?

Yes. Both Z0-LED length variants support continuous brightness adjustment.

How is the light removed for charging?

Pull the light bar away from its two magnetic adhesive plates, charge it through the Type-C port, and return it in the same orientation.

無段階調光マグネットセンサーライトバー – Z0-LED

Q: Which Z0-LED length should I choose?

Choose by usable mounting space: the body lengths are 210 and 297 mm. Both are rated at 3 W, with 1200 and 1800 mAh batteries respectively.

XGYUCL-Z0-LED充電式マグネットセンサーライトバーは、210 mmおよび297 mmの長さで、3 W、Type-C充電、無段階調光に対応しています。M1は連続点灯、M2は暗さ検知と赤外線モーションセンシングを組み合わせます。

Continuous brightness adjustment: both Z0-LED models support stepless dimming.
Two operating modes: M1 keeps the light on, while M2 uses darkness detection with infrared motion sensing.
Consistent efficacy: both length variants are listed at 100 lm/W.
Wide white-light range: the series covers 3000–6500 K color temperature.

Body Lengths	210 / 297 mm
Rated Power	各3 W
Battery Capacity	1200 / 1800 mAh

CCT / 発光効率	3000–6500 K / 100 lm/W
充電／取付	Type-C／マグネット粘着プレート2枚
Control / Modes	無段階調光；M1連続点灯；M2暗所＋IRセンシング

White stepless-dimming magnetic sensor light bar on white background

XGYUCL-Z0-LED-210MM-CCT-E7 rechargeable magnetic sensor light bar, 210 × 38 × 23 mm

Z0-LED rechargeable magnetic sensor light bar installed beneath a kitchen cabinet

XGYUCL-Z0-LED-297MM-CCT-E11 rechargeable magnetic sensor light bar, 297 × 38 × 23 mm

Technical Specifications

Model Specifications

モデル	Dimensions	消費電力	バッテリー	Efficacy	調光	CCT	充電
XGYUCL-Z0-LED-210MM-CCT-E7	210 × 38 × 23 mm	3 W	1200 mAh	100 lm/W	無段階調光	3000–6500 K	Type-C
XGYUCL-Z0-LED-297MM-CCT-E11	297 × 38 × 23 mm	3 W	1800 mAh	100 lm/W	無段階調光	3000–6500 K	Type-C

Product Description

Product Details

Product Construction

この充電式ライトバーは、ABSハウジング、Type-C充電ポート、マグネット粘着プレート2枚を採用しています。プレートは取付面に残したまま、ライト本体を取り外して充電できます。

Selection & Installation Notes

Select the 210 or 297 mm body by the available mounting space, then match its 1200 or 1800 mAh battery capacity. Keep the sensor end clear of cabinet lips and door edges, test the intended approach direction, and clean the surface before fixing both magnetic plates. Compare related products in our cabinet lights range.

Recommended Application

用途

Under-Cabinet Task Lighting: センサーが前縁部から離れるように、スリムバーをキッチンキャビネットの下に取り付けてください。
Wardrobes And Closets: Use M2 mode for night-time motion response inside storage areas.
Shelf Display Lighting: 棚の開口部に収まり、ディフューザーを遮らない本体長を選定してください。
Bedside Route Lighting: Install the rechargeable bar along an indoor night route where the infrared sensor faces the approach path.

つながりを
保つ