Tubos LED T10 IP65 para barcos de pesca
- Wide Linear Light Distribution: A 160-degree beam spreads illumination across the work surface rather than concentrating it in a narrow spot.
- Release-from-Clip Service: A lâmpada pode ser retirada dos suportes externos sem desmontar o corpo de iluminação fechado.
- Rounded Low-Profile Form: The slim cylindrical envelope follows overhead and bulkhead surfaces without a separate metal fixture housing.
- Flexible Mounting Spans: Short, medium and long bodies cover compact task zones or extended work passages within one product family.
| Tubo e proteção contra ingressos | Full-PC T10 tube; IP65 in the specified assembled configuration |
|---|---|
| Tensão de entrada | AC/DC 12-24 V |
| Dimensions | D 36 x L 350 / 550 / 750 mm |
| Rated Power | 10 / 20 / 30 W |
| Eficácia e CCT | 80-130 lm/W; 3000-8000 K |
|---|---|
| Versions | Fixo ou interligável M10 |
| Limite de interligação | Máximo de 3 lâmpadas |
Technical Specifications
Model Specifications
| Model No. | Dimensions D x L (mm) | Rated Power | Version | Efficacy | CCT |
|---|---|---|---|---|---|
| XGYFBL-S-T10B7350-E10 | 36 x 350 | 10 W | Fixo | 80-130 lm/W | 3000-8000 K |
| XGYFBL-S-T10B7550-E20 | 36 x 550 | 20 W | Fixo | 80-130 lm/W | 3000-8000 K |
| XGYFBL-S-T10B7750-E30 | 36 x 750 | 30 W | Fixo | 80-130 lm/W | 3000-8000 K |
| XGYFBL-M-T10B7350-E10 | 36 x 350 | 10 W | Interligável | 80-130 lm/W | 3000-8000 K |
| XGYFBL-M-T10B7550-E20 | 36 x 550 | 20 W | Interligável | 80-130 lm/W | 3000-8000 K |
| XGYFBL-M-T10B7750-E30 | 36 x 750 | 30 W | Interligável | 80-130 lm/W | 3000-8000 K |
IP65 applies to the specified assembled lamp, cable and connector configuration. Interconnectable runs are limited to three lamps.
Product Description
Product Details
Product Construction
The LED assembly is enclosed inside a polycarbonate cylinder. A gasketed inlet and threaded low-voltage coupling terminate the lead, while external supports secure the assembly to the mounting surface.
Selection & Installation Notes
Faça corresponder o comprimento de 350, 550 ou 750 mm e o respetivo modelo de 10, 20 ou 30 W e, em seguida, escolha a versão fixa ou interligável. IP65 aplica-se à disposição especificada da lâmpada, cabo e conector montados; as linhas interligáveis estão limitadas a três lâmpadas, e a alimentação 12-24 V, a secção do cabo e a queda de tensão devem ser adequadas à linha completa.
Recommended Application
Aplicações
- Fishing Boat Cabins: Provide low-voltage linear lighting in enclosed cabins and onboard service spaces.
- Covered Work Decks: Mount the sealed tube beneath covered fishing-vessel work areas where spray and damp conditions occur.
- Ferry Service Areas: Utilize as versões fixas ou ligadas em passagens cobertas de ferry e zonas de serviço.
- Underground Walkways: Install linear runs along damp pedestrian passages using the specified sealed connections.
em contacto
- N.º 5 Fenghuang Road, Qianjiang Industrial Area, Dingqiao Town, Haining, Zhejiang 314413, China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Frequently Asked Questions?
Encontre respostas claras às perguntas frequentes sobre especificações de produtos, seleção de modelos, aplicações e requisitos de cotação. Para necessidades específicas de projetos, envie-nos o seu mercado de destino, a quantidade necessária e as principais especificações.
Yes. The specified input range is AC/DC 12-24 V. The supply capacity, protection and cable sizing still need to match the selected lamp or connected run.
Os modelos S funcionam como lâmpadas independentes. Os modelos M utilizam a disposição de ligação M10 especificada para linhas interligadas planeadas.
O limite atual da série é de três lâmpadas por linha ligada. Dimensione a alimentação e a cablagem de 12-24 V para a potência nominal total e a queda de tensão.
No. IP65 applies to the specified assembled configuration against dust and water jets; it is not a submersion rating.
Match the available mounting space to the exact 350, 550 or 750 mm length. Each option has a corresponding 10, 20 or 30 W rating.
As marcações disponíveis incluem CE, CB, RoHS e ErP para configurações aplicáveis. As marcações fornecidas devem corresponder à versão de produção confirmada e ao mercado de destino.












