LED Solar Wall Lamps

LED solar wall lamps are wall-mounted lighting products for sites with suitable daylight access. Select the approved design around the mounting position, available exposure and project requirements.

Four Visual Profiles: Distinct product forms support different wall proportions and architectural contexts.
Vertical-Surface Footprint: The installed lamp occupies a wall position while leaving ground and horizontal surfaces clear.
Daylight-Oriented Positioning: The collection area can be directed toward available daylight and away from persistent shade.
Enclosed Component Layout: Energy-storage and operating components remain within the selected lamp assembly.

Rated Power	2–3 W
Output	150 or 300 lm
Solar Panel	5.5 V polysilicon; 0.5–1.55 W

Battery	One or two 18650 cells by reference
Housing	ABS + PC
Protection	IP54

XGYSWL-FL0004-E3 LED solar wall light with Model and Size labels

XGYSWL-FL0004-E3 solar wall light installed beside a residential entrance

XGYSWL-FL0015-E3 LED solar wall light with Model and Size labels

XGYSWL-FL0018-E3 LED solar wall light with Model and Size labels

XGYSWL-FL0011-E2 LED solar wall light with Model and Size labels

Technical Specifications

Model Specifications

Model	Rated Power (W)	Dimensions W x H x T (mm)	Total Lumen (lm)	Solar Panel	Battery	Body Material
XGYSWL-FL0004-E3	3	153 x 105 x 45	300	5.5 V / 1.0 W polysilicon	1 x 18650 / 2200 mAh	ABS + PC
XGYSWL-FL0015-E3	3	120 x 192 x 40	300	5.5 V / 1.0 W polysilicon	2 x 18650 / 1200 mAh	ABS + PC
XGYSWL-FL0018-E3	3	140 x 113 x 60	150	5.5 V / 0.5 W polysilicon	1 x 18650 / 1200 mAh	ABS + PC
XGYSWL-FL0011-E2	2	130 x 95 x 60	150	5.5 V / 1.55 W polysilicon	1 x 18650 / 1200 mAh	ABS + PC

Product Description

Product Details

Product Construction

The selected design places a light-emitting face and collection surface within one assembly. Internal energy-storage, electrical and operating arrangements remain enclosed within the approved construction.

Selection & Installation Notes

Check the substrate, anchor method, fastening access, service clearance and nearby obstructions at each position. Record the environmental exposure and required operating method in the project specification before approving the sample and installation plan. Compare related products in our solar wall light range.

Recommended Application

Applications

Residential Entrances: Place the selected wall lamp beside an entrance with a verified mounting surface and daylight access.
Garden Gate Walls: Coordinate the lamp position with the gate layout, surrounding shade and maintenance access.
Building Side Routes: Use wall-mounted lighting along side passages where the installation position meets the approved site plan.
Courtyard Boundaries: Integrate the selected body design into courtyard walls planned for suitable exposure and mounting conditions.

Keep
in touch

Tell Us Your Market and Product Needs

Share your market, product interest, application, or estimated quantity. Our team can help you move faster from product selection to quotation and sample discussion.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

What defines this as a solar wall lamp?

It is a wall-mounted lighting product with a solar collection surface. The name does not establish a particular energy-storage package, charging time, operating duration or lighting output.

How should an installation position be selected?

Check the mounting surface, orientation, surrounding shade, daylight access and maintenance route for each position before approving the installation plan.

Does the product name establish operating duration?

No. Operating duration depends on the approved order configuration and site conditions. Confirm the required operating profile before ordering.

Is a sensor or control method included in every design?

The family name does not establish a sensor, control method or operating sequence. Specify and approve any required function for the selected order configuration.

Can every design be used in the same weather exposure?

No universal environmental suitability is implied. Confirm the required enclosure protection and site conditions for the selected configuration before installation.

What can New Lights configure for an OEM/ODM project?

We can configure the approved body design, labeling and packaging around the confirmed installation plan, order reference and production sample.