What is the difference between the external and integrated emergency versions?

The glass-tube version uses a separate emergency driver and battery outside the lamp. The ALU+PC version places the driver and battery inside the tube body, so fixture space and service access differ.

What are the battery specifications for the two configurations?

The external system uses DC 12 V with 600 mAh charging capacity. The integrated system uses DC 3.7 V with 1400 mAh charging capacity.

Tubo LED T8 de emergencia

Q: How long does each emergency T8 version operate during an outage?

The external system is rated for 90 minutes after a full charge. The integrated system is rated for 60 minutes after an 8-hour charge.

Q: Is emergency brightness the same as normal brightness?

Not necessarily. Emergency output can be configured from 50% to 90%, and the selected level must be matched to the battery and required backup duration.

Q: Where is this emergency T8 tube intended to be used?

The available product information identifies indoor use with 30-degree or 160-degree beam options. It does not establish an outdoor or wet-location rating.

Este tubo T8 LED de emergencia G13 está disponible como tubo de vidrio con controlador externo y batería para respaldo de 90 minutos, o como tubo ALU+PC con controlador y batería integrados para respaldo de 60 minutos. Cuatro longitudes de 590 a 1499 mm cubren configuraciones de iluminación de emergencia interior de 9 W a 22 W.

Outage Continuity: The rechargeable emergency system keeps selected indoor areas illuminated when the normal supply is interrupted.
Rechargeable Recovery: Each configuration restores battery readiness through its matched charging system after backup operation.
Runtime-Level Balance: El funcionamiento con luz reducida permite equilibrar la visibilidad de respaldo y el tiempo de funcionamiento para la zona prevista.
Clear Emergency Light: Smooth output and reliable color recognition support indoor visibility while the backup circuit is active.

Emergency Configurations	Tubo de vidrio con controlador externo y batería / tubo ALU+PC con controlador y batería integrados
Sistemas de respaldo	External: 90 min, DC 12 V, 600 mAh / Integrated: 60 min after 8 h charge, DC 3.7 V, 1400 mAh
Tamaño y casquillo	Dia. 26 x L 590 / 895 / 1199 / 1499 mm; G13

Rated Power	9 / 12 / 18 / 22 W
Emergency Output	Configurable 50%-90%
Light & Electrical	Non-flicker; Ra > 80; 20,000 h; 220-240 V; PF 0.9; 30/160 degrees; indoor

XGYT8B102EL-E9 emergency T8 LED tube, Dia. 26 x L 590 mm, External Driver & Battery

Emergency T8 LED tubes providing backup illumination in an indoor corridor

XGYT8B103EL-E12 emergency T8 LED tube, Dia. 26 x L 895 mm, External Driver & Battery

XGYT8B104EL-E18 emergency T8 LED tube, Dia. 26 x L 1199 mm, External Driver & Battery

XGYT8B105EL-E22 emergency T8 LED tube, Dia. 26 x L 1499 mm, External Driver & Battery

XGYT8B202EL-E9 emergency T8 LED tube, Dia. 26 x L 590 mm, Integrated Driver & Battery

XGYT8B203EL-E12 emergency T8 LED tube, Dia. 26 x L 895 mm, Integrated Driver & Battery

XGYT8B204EL-E18 emergency T8 LED tube, Dia. 26 x L 1199 mm, Integrated Driver & Battery

XGYT8B205EL-E22 emergency T8 LED tube, Dia. 26 x L 1499 mm, Integrated Driver & Battery

Technical Specifications

Model Specifications

Configuración	Model No.	Tamaño diám. x L (mm)	Potencia	Sustitución	Efficacy	CCT
External driver & battery	XGYT8B102EL-E9	26 x 590	9 W	18 W	80-160 lm/W	3000-8000 K
External driver & battery	XGYT8B103EL-E12	26 x 895	12 W	30 W	80-160 lm/W	3000-8000 K
External driver & battery	XGYT8B104EL-E18	26 x 1199	18 W	36 W	80-160 lm/W	3000-8000 K
External driver & battery	XGYT8B105EL-E22	26 x 1499	22 W	58 W	80-160 lm/W	3000-8000 K
Integrated driver & battery	XGYT8B202EL-E9	26 x 590	9 W	18 W	80-160 lm/W	3000-8000 K
Integrated driver & battery	XGYT8B203EL-E12	26 x 895	12 W	30 W	80-160 lm/W	3000-8000 K
Integrated driver & battery	XGYT8B204EL-E18	26 x 1199	18 W	36 W	80-160 lm/W	3000-8000 K
Integrated driver & battery	XGYT8B205EL-E22	26 x 1499	22 W	58 W	80-160 lm/W	3000-8000 K

The external glass-tube system is rated for 90 minutes after full charge. The integrated ALU+PC system is rated for 60 minutes after an 8-hour charge.

Product Description

Product Details

Product Construction

The series uses a 26 mm G13 tube in two distinct emergency constructions. The glass version works with a separate red emergency driver and external battery pack, while the ALU+PC version places the driver and battery inside the tube body.

Selection & Installation Notes

Select the external or integrated construction first, then match the 590, 895, 1199 or 1499 mm length and its 9, 12, 18 or 22 W rating. Confirm fixture wiring, charging supply, emergency controls, component space and the required backup test procedure before installation; do not assume direct replacement of a standard T8 circuit.

Recommended Application

Applications

Emergency Corridors: Provide backup route lighting in indoor corridors and stair access areas during a normal-power interruption.
Industrial Facilities: Maintain selected indoor warehouse and production-area lighting when the main supply fails.
Education Buildings: Support emergency illumination in school corridors, common areas and circulation spaces.
Healthcare Facilities: Keep selected hospital and clinic circulation areas illuminated during an outage.

Mantente
en contacto

Indíquenos su mercado y sus necesidades de producto

Indíquenos su mercado, el producto de interés, la aplicación o la cantidad estimada. Nuestro equipo puede ayudarle a avanzar más rápido desde la selección del producto hasta la oferta y el análisis de muestras.

Frequently Asked Questions?

Encuentre respuestas claras a las preguntas habituales sobre especificaciones de producto, selección de modelos, aplicaciones y requisitos de presupuesto. Para necesidades específicas de un proyecto, envíenos su mercado de destino, la cantidad requerida y las especificaciones clave.

¿Cuál es la diferencia entre las versiones de emergencia externa e integrada?

La versión con tubo de vidrio utiliza un controlador de emergencia y una batería independientes fuera de la lámpara. La versión ALU+PC sitúa el controlador y la batería dentro del cuerpo del tubo, por lo que el espacio de la luminaria y el acceso para mantenimiento son distintos.

How long does each emergency T8 version operate during an outage?

El sistema externo está clasificado para 90 minutos tras una carga completa. El sistema integrado está clasificado para 60 minutos tras una carga de 8 horas.

Is emergency brightness the same as normal brightness?

No necesariamente. La salida de emergencia puede configurarse del 50% al 90%, y el nivel seleccionado debe corresponder a la batería y a la duración de respaldo requerida.

Can this emergency tube directly replace any standard T8 tube?

No universal direct replacement is established. Confirm the fixture wiring, charging supply, emergency control arrangement, G13 holder spacing and component space before installation.

¿Cuáles son las especificaciones de batería de las dos configuraciones?

El sistema externo utiliza DC 12 V con una capacidad de carga de 600 mAh. El sistema integrado utiliza DC 3.7 V con una capacidad de carga de 1400 mAh.

Where is this emergency T8 tube intended to be used?

La información disponible del producto identifica el uso en interiores con opciones de haz de 30 grados o 160 grados. No establece una clasificación para exteriores ni ubicaciones húmedas.