Aplique solar IP54 XGYSWL-LTRP-E0.15

La XGYSWL-LTRP-E0.15 es una luz solar de pared compacta con IP54, salida de 30 lm y control mediante sensor IR. Su panel monocristalino de 5.5 V / 0.7 W carga una batería interna 18650 de 1200 mAh para iluminación exterior de orientación sin red eléctrica.

Mains-Free Placement: Integrated solar charging supports wall locations without a wired power feed.
Orientation Lighting: The 30 lm output provides low-level guidance around entrances and paths.
Automatic Activation: The IR sensor supports responsive operation along the intended approach route.
Compact Wall Profile: The enclosure requires enough mounting area for its overall dimensions.

Dimensions	70×60×100 mm
Potencia nominal / Salida	0.15 W / 30 lm
Solar Panel	5.5 V / 0.7 W monocristalino

Batería	18650 1200 mAh
Cuerpo / protección	Hierro SPCC + PC / IP54
Sensor / Control	Sensor IR

XGYSWL-LTRP-E0.15 IP54 solar wall light product image

XGYSWL-LTRP-E0.15 low-output solar wall light installed beside an exterior entrance at dusk

Technical Specifications

Model Specifications

Model No.	Dimensions	Rated Power	Salida	Solar Panel	Batería	Protection
XGYSWL-LTRP-E0.15	70×60×100 mm	0.15 W	30 lm	5.5 V / 0.7 W	18650 1200 mAh	IP54

Product Description

Product Details

Product Construction

La XGYSWL-LTRP-E0.15 integra un panel solar monocristalino, una batería 18650, una luz LED y un sensor IR dentro de una envolvente de hierro SPCC y PC de 70 × 60 × 100 mm.

Selection & Installation Notes

Mount the panel where it receives unobstructed daylight, with the sensor facing the intended approach route. Confirm wall strength, drainage and the required night operating mode before final fixing. The IP54 rating defines the outdoor exposure boundary. Compare related products in our solar wall lights range.

Recommended Application

Applications

Residential Entrances: Sensor control provides low-level guidance at sun-exposed exterior doorways.
Garden Side Passages: The 30 lm output supports orientation along paths beside homes and small buildings.
Boundary Walls: Solar charging serves wall positions where a mains cable is unavailable.
Outdoor Utility Areas: The compact enclosure suits protected service locations with clear daylight exposure.

Mantente
en contacto

Indíquenos su mercado y sus necesidades de producto

Indíquenos su mercado, el producto de interés, la aplicación o la cantidad estimada. Nuestro equipo puede ayudarle a avanzar más rápido desde la selección del producto hasta la oferta y el análisis de muestras.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

How much direct sun does XGYSWL-LTRP-E0.15 need?

Install the panel where it receives unobstructed daylight. Shade, winter sun angle and dirt on the panel reduce the available charging energy.

Will it work through a full night?

Operating time depends on the daily solar charge, battery condition, ambient temperature and selected sensor mode. Verify the required night profile at the installation site.

¿Hacia dónde debe orientarse el sensor?

Aim the IR sensor toward the expected approach path and away from moving plants, traffic or heat sources that could cause unwanted activation.

Can it be installed in fully exposed rain?

It is rated IP54. Match the mounting position to that rating and keep the product away from water jets or immersion.

What should be checked before fixing the product?

Check wall strength, panel sun exposure, sensor direction, drainage and the required night operating mode before final fixing.

¿Qué elementos OEM/ODM pueden configurarse?

We can configure supported housing finish, CCT, sensing sequence, labels and packaging after the electrical and environmental sample is approved.