Can the brightness be adjusted?

Yes. The listed control is stepless dimming; confirm the adjustment behavior on the approved sample.

Luz delgada recargable para armario con sensor

This slim rechargeable sensor cabinet light family covers five lengths from 100 to 500 mm, with matched 30 to 140 lm outputs and 200 to 900 mAh batteries. Each white bar uses stepless dimming, Type-C charging, two magnetic adhesive plates and three operating modes.

Five Matched Lengths: Each 100, 150, 210, 297 or 500 mm bar has its own power, battery and output row.
Stepless Brightness Control: Adjust the light level continuously for the selected cabinet or shelf task.
Removable Magnetic Mounting: Two adhesive plates retain the slim bar while allowing removal for Type-C charging.
Three Operating Modes: Select continuous light, night-plus-IR sensing or the separate SOS flash signal.

Length Range	100 / 150 / 210 / 297 / 500 mm
Rated Power	0.5–2 W
Salida	30–140 lm

Batería	200–900 mAh
CCT	3000–6500 K
Carga	USB Type-C

Slim silver rechargeable sensor cabinet light on white background

XGYUCL-Z0-100GYD-CCT-E1 slim rechargeable sensor cabinet light, 100 × 18.5 × 17 mm

slim white rechargeable sensor light beneath a kitchen cabinet

XGYUCL-Z0-150GYD-CCT-E1 slim rechargeable sensor cabinet light, 150 × 18.5 × 17 mm

XGYUCL-Z0-210GYD-CCT-E1 slim rechargeable sensor cabinet light, 210 × 18.5 × 17 mm

XGYUCL-Z0-297GYD-CCT-E1 slim rechargeable sensor cabinet light, 297 × 18.5 × 17 mm

XGYUCL-Z0-500GYD-CCT-E1 slim rechargeable sensor cabinet light, 500 × 18.5 × 17 mm

Technical Specifications

Model Specifications

Modelo	Dimensions	Potencia	Batería	Salida	CCT	Control
XGYUCL-Z0-100GYD-CCT-E1	100 × 18.5 × 17 mm	0.5 W	200 mAh	30 lm	3000–6500 K	Regulación continua
XGYUCL-Z0-150GYD-CCT-E1	150 × 18.5 × 17 mm	0.5 W	280 mAh	42 lm	3000–6500 K	Regulación continua
XGYUCL-Z0-210GYD-CCT-E1	210 × 18.5 × 17 mm	1 W	350 mAh	60 lm	3000–6500 K	Regulación continua
XGYUCL-Z0-297GYD-CCT-E1	297 × 18.5 × 17 mm	1 W	450 mAh	88 lm	3000–6500 K	Regulación continua
XGYUCL-Z0-500GYD-CCT-E1	500 × 18.5 × 17 mm	2 W	900 mAh	140 lm	3000–6500 K	Regulación continua

Product Description

Product Details

Product Construction

The slim white bar combines an aluminum casing, PC diffuser and ABS end caps around the internal light engine, battery and sensing components.

Selection & Installation Notes

Confirm substrate suitability and clearance around the installed bar. Keep the sensing area unobstructed and preserve enough access to detach the unit for routine handling and Type-C charging. Compare other formats in our under-cabinet lights range.

Recommended Application

Applications

Kitchen Counters: Mounts beneath upper cabinets to illuminate preparation surfaces with adjustable output.
Wardrobe Interiors: Uses night-plus-IR sensing when the wardrobe opens in low ambient light.
Storage Shelves: Fits shelf openings through five length choices and removes for Type-C charging.
Bedside Route Lighting: Provides adjustable low-level light with continuous or sensor operation.

Mantente
en contacto

Tell Us Your Market and Product Needs

Share your market, product interest, application, or estimated quantity. Our team can help you move faster from product selection to quotation and sample discussion.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

¿Qué longitud debo elegir?

Measure the clear mounting span, then select the 100, 150, 210, 297 or 500 mm model and its matched power, battery and output row.

Do all five lengths have the same output?

No. Output increases by exact model from 30 lm to 140 lm; use the table rather than treating the family as one rating.

How is the light removed for charging?

La barra se separa de las dos placas adhesivas magnéticas y se carga mediante USB Type-C.

Which operating modes are available?

Los modos indicados son luz continua, detección nocturna más IR y destello SOS.

¿Se puede ajustar el brillo?

Sí. El control indicado es regulación continua; confirme el comportamiento del ajuste con la muestra aprobada.

¿Qué debe confirmarse antes de la producción?

Confirm the exact length model, white finish, CCT, mode behavior, two-plate inclusion, charging interface, labels, packaging and complete sample.