Lámparas germicidas UV-C T5
- Compact Equipment Fit: The slim linear geometry supports space-conscious module layouts.
- Planned Servicing: A removable format supports scheduled replacement without changing the surrounding assembly.
- Portfolio Planning: Available lengths cover compact and extended housings within a coordinated development programme.
- OEM Component Supply: Lamps are prepared against a defined equipment specification for sampling and production.
| Diámetro del tubo | Φ16 mm |
|---|---|
| Connection | G5 de dos pines en ambos extremos |
| Length range | 135.9–849 mm |
| Rango de potencia nominal | 4–21 W |
|---|---|
| Elección de variante | Construcción con ozono o sin ozono |
| Elemento suministrado | Solo lámpara; los componentes del equipo se suministran por separado |
Technical Specifications
Model Specifications
| Modelo | Dimensions | Connection | Rated Power | Espectro | Intensidad UV-C indicada (µW/cm²) |
|---|---|---|---|---|---|
| XGYT5-UVC-4W | Φ16 × 135.9 mm | G5 | 4 W | UVC | 11 |
| XGYT5-UVC-6W | Φ16 × 212.1 mm | G5 | 6 W | UVC | 17 |
| XGYT5-UVC-8W | Φ16 × 288.3 mm | G5 | 8 W | UVC | 22 |
| XGYT5-HO-UVC-15W | Φ16 × 288.3 mm | G5 | 15 W | UVC | 50 |
| XGYT5-UVC-14W | Φ16 × 549 mm | G5 | 14 W | UVC | 45 |
| XGYT5-UVC-21W | Φ16 × 849 mm | G5 | 21 W | UVC | 68 |
Listed UV-C intensity values are provided for the lamp components. Measurement distance, geometry and test conditions are not provided, so the values are not for cross-model performance comparison or finished-system design.
Product Description
Product Details
Product Construction
This T5 lamp is a straight low-pressure mercury-vapour discharge tube with a G5 bi-pin cap at each end. The supplied component is the lamp only; holders, ballast, enclosure and operating controls belong to the host equipment.
Selection & Installation Notes
Match the complete model, Φ16 tube diameter, exact length, rated power, G5 holder spacing and ballast requirement. Specify ozone or non-ozone construction separately. The equipment designer must define the enclosure, access controls, operating sequence and maintenance procedure before integration. Compare related components in our UV-C germicidal lamp range.
Recommended Application
Applications
- Air-Handling Equipment: Integrate the selected tube into an enclosed module with matched G5 holders, ballast and controls.
- Water-Processing Equipment: Install the lamp inside enclosed equipment whose sleeve, flow path and operating controls are defined by the system designer.
- Process Equipment Modules: Use the lamp as a replaceable component in a controlled equipment assembly with restricted access.
- OEM Equipment Prototypes: Evaluate the complete lamp reference with the intended holder spacing, ballast, enclosure and control sequence.
en contacto
- N.º 5, Fenghuang Road, Zona Industrial de Qianjiang, localidad de Dingqiao, Haining, Zhejiang 314413, China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Frequently Asked Questions?
Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.
El producto suministrado es únicamente la lámpara. Los portalámparas, el balasto, la carcasa, los controles y otras piezas del equipo se suministran por separado.
Haga corresponder el modelo completo, el diámetro Φ16, la longitud exacta, la potencia nominal, la separación del portalámparas G5 y el requisito de balasto.
No. El equipo anfitrión debe proporcionar un balasto especificado para la lámpara seleccionada y el circuito de funcionamiento.
Treat them as separate equipment configurations. Specify the required construction with the complete lamp reference and host-equipment design.
No. It is supplied as a component for enclosed OEM equipment whose designer defines the enclosure, access controls, operating sequence and maintenance procedure.
No. Lamp specifications alone do not establish finished-equipment performance; any system-level claim requires system-specific validation by the responsible equipment manufacturer.








