New Lights

Luce da mobile ricaricabile sottile con sensore

This slim rechargeable sensor cabinet light family covers five lengths from 100 to 500 mm, with matched 30 to 140 lm outputs and 200 to 900 mAh batteries. Each white bar uses stepless dimming, Type-C charging, two magnetic adhesive plates and three operating modes.
  • Five Matched Lengths: Each 100, 150, 210, 297 or 500 mm bar has its own power, battery and output row.
  • Stepless Brightness Control: Regolare continuamente il livello di luce per l'attività selezionata su mobile o ripiano.
  • Removable Magnetic Mounting: Two adhesive plates retain the slim bar while allowing removal for Type-C charging.
  • Three Operating Modes: Select continuous light, night-plus-IR sensing or the separate SOS flash signal.
Length Range100 / 150 / 210 / 297 / 500 mm
Rated Power0.5–2 W
Uscita30–140 lm
Batteria200–900 mAh
CCT3000–6500 K
RicaricaUSB Type-C

Technical Specifications

Model Specifications

ModelloDimensionsPotenzaBatteriaUscitaCCTControllo
XGYUCL-Z0-100GYD-CCT-E1100 × 18.5 × 17 mm0.5 W200 mAh30 lm3000–6500 KDimmerazione continua
XGYUCL-Z0-150GYD-CCT-E1150 × 18.5 × 17 mm0.5 W280 mAh42 lm3000–6500 KDimmerazione continua
XGYUCL-Z0-210GYD-CCT-E1210 × 18.5 × 17 mm1 W350 mAh60 lm3000–6500 KDimmerazione continua
XGYUCL-Z0-297GYD-CCT-E1297 × 18.5 × 17 mm1 W450 mAh88 lm3000–6500 KDimmerazione continua
XGYUCL-Z0-500GYD-CCT-E1500 × 18.5 × 17 mm2 W900 mAh140 lm3000–6500 KDimmerazione continua

Product Description

Product Details

Product Construction

The slim white bar combines an aluminum casing, PC diffuser and ABS end caps around the internal light engine, battery and sensing components.

Selection & Installation Notes

Confermare l'idoneità del substrato e lo spazio libero attorno alla barra installata. Mantenere libera l'area di rilevamento e garantire accesso sufficiente per staccare l'unità durante la normale gestione e la ricarica Type-C. Confronta altri formati nella nostra under-cabinet lights range.

Recommended Application

Applicazioni

  • Kitchen Counters: Mounts beneath upper cabinets to illuminate preparation surfaces with adjustable output.
  • Wardrobe Interiors: Uses night-plus-IR sensing when the wardrobe opens in low ambient light.
  • Storage Shelves: Fits shelf openings through five length choices and removes for Type-C charging.
  • Bedside Route Lighting: Provides adjustable low-level light with continuous or sensor operation.
Rimani
in contatto

Descrivici le esigenze del tuo mercato e dei tuoi prodotti

Condividi il tuo mercato, l’interesse per il prodotto, l’applicazione o la quantità stimata. Il nostro team può aiutarti ad accelerare il passaggio dalla selezione del prodotto alla quotazione e alla discussione sui campioni.

Frequently Asked Questions?

Trova risposte chiare alle domande comuni su specifiche del prodotto, selezione del modello, applicazioni e requisiti per il preventivo. Per esigenze specifiche di progetto, inviaci il mercato di destinazione, la quantità richiesta e le specifiche principali.

Quale lunghezza devo scegliere?

Measure the clear mounting span, then select the 100, 150, 210, 297 or 500 mm model and its matched power, battery and output row.

Do all five lengths have the same output?

No. Il flusso aumenta in base al modello esatto da 30 lm a 140 lm; utilizzare la tabella anziché considerare la famiglia come un'unica classificazione.

Come si rimuove la luce per la ricarica?

La barra si stacca dalle due piastre adesive magnetiche e si ricarica tramite USB Type-C.

Which operating modes are available?

Le modalità elencate sono luce continua, rilevamento notturno più IR e lampeggio SOS.

La luminosità può essere regolata?

Sì. Il controllo indicato è la dimmerazione continua; verificare il comportamento della regolazione sul campione approvato.

Cosa deve essere confermato prima della produzione?

Confirm the exact length model, white finish, CCT, mode behavior, two-plate inclusion, charging interface, labels, packaging and complete sample.

Featured Products

Scroll to Top

Send Us a Message

Lascia i tuoi recapiti e un messaggio. Il nostro team risponderà via e-mail o tramite il canale di contatto che preferisci.

Parlaci del tuo progetto di illuminazione

Comunica le tue esigenze relative a prodotto, applicazione e acquisto. Il nostro team illuminotecnico risponderà con opzioni adeguate e supporto al progetto.