XGYSWL-WFLEN-E0.3 IP54 ソーラーウォールライト
- Mains-Free Placement: Integrated solar charging supports wall locations without a wired power feed.
- Orientation Lighting: The 30 lm output provides low-level guidance around entrances and paths.
- Motion-Triggered Use: Detection reserves light output for nearby movement.
- Round Wall Form: The circular enclosure requires wall area and projection clearance before final fixing.
| Dimensions | Ø201×109 mm |
|---|---|
| 定格電力/出力 | 0.3 W / 30 lm |
| Solar Panel | 5.5 V / 1 W monocrystalline |
| バッテリー | 18650 2000 mAh |
|---|---|
| 本体 / 保護等級 | SPCC鉄 + PC / IP54 |
| センサー / 制御 | IRセンサー |
Technical Specifications
Model Specifications
| Model No. | Dimensions | Rated Power | 出力 | Solar Panel | バッテリー | Protection |
|---|---|---|---|---|---|---|
| XGYSWL-WFLEN-E0.3 | Ø201×109 mm | 0.3 W | 30 lm | 5.5 V / 1 W | 18650 2000 mAh | IP54 |
Product Description
Product Details
Product Construction
円形のSPCC鉄およびPC製筐体に、ソーラーパネル、充電式バッテリー、LEDライト、IRセンサーを一体化した壁面取付ユニットです。
Selection & Installation Notes
Mount the panel where it receives unobstructed daylight, with the sensor facing the intended approach route. Confirm mounting strength, projection clearance, drainage and the required night operating mode before final fixing. The IP54 rating defines the outdoor exposure boundary. Compare related products in our solar wall lights range.
Recommended Application
用途
- Residential Entrances: Sensor control provides low-level guidance at sun-exposed exterior doorways.
- Garden Side Passages: The 30 lm output supports orientation along paths beside homes and small buildings.
- Boundary Walls: Solar charging serves wall positions where a mains cable is unavailable.
- Outdoor Utility Areas: The round enclosure suits protected service locations with clear daylight exposure.
Frequently Asked Questions?
製品仕様、モデル選定、用途、見積要件に関するよくある質問への明確な回答をご確認ください。プロジェクト固有の要件については、対象市場、必要数量、主要仕様をお送りください。
パネルは遮るもののない日光を受ける位置に設置してください。日陰、冬季の太陽高度、パネルの汚れは利用可能な充電エネルギーを低下させます。
Operating time depends on the daily solar charge, battery condition, ambient temperature and selected sensor mode. Verify the required night profile at the installation site.
Aim the IR sensor toward the expected approach path and away from moving plants, traffic or heat sources that could cause unwanted activation.
IP54等級です。取付位置をこの等級に適合させ、製品を噴流水や浸水から遠ざけてください。
最終固定前に、取付強度、パネルの日照、センサーの向き、照射クリアランス、排水、および必要な夜間動作モードを確認してください。
We can configure supported housing finish, CCT, sensing sequence, labels and packaging after the electrical and environmental sample is approved.




