New Lights

PL-L UV-C kiemdodende lampen

PL-L UV-C germicidal lamps are clear Φ18 mm return-tube components with 2G11 four-pin bases. Three models cover 225–415 mm lengths for enclosed OEM equipment.
  • Parallel Return Geometry: Paired clear legs fold back to form the elongated lamp body.
  • Consolidated End Connection: Four contacts sit at one end of the assembly.
  • Serviceable Source Module: The consumable component remains separate from its host equipment.
  • Three Physical Envelopes: Individual order codes suit different equipment-cavity lengths.
Lamp formPL-L twin-tube return form, Φ18 mm
Nominaal vermogen18–36 W
Base / connection2G11 4-pin single-ended base
Primary wavelength253.7 nm UV-C
Ozone choiceNon-ozone or ozone-generating variant; 185 nm applies to the ozone option
Supply boundaryLamp only; holder, ballast, enclosure and safeguards are separate
Rated lifetime / warranty8,000–10,000 h / 1 year

Technical Specifications

Model Specifications

ModelDimensionsConnectionRated PowerSpectrumListed UV-C Intensity (μW/cm²)
XGYPLL-UVC-18WΦ18 × 225 mm2G1118 WUVC52
XGYPLL-UVC-24WΦ18 × 320 mm2G1124 WUVC100
XGYPLL-UVC-36WΦ18 × 415 mm2G1136 WUVC150

Each UV-C intensity entry is a lamp-component reference. Because measurement distance, geometry and test conditions are not specified, do not use these values for cross-model comparison or finished-system design.

Product Description

Product Details

Product Construction

The PL-L product is a low-pressure mercury-vapour source with a clear Φ18 mm glass body. It is supplied as a lamp component; the complete system provides the holder, ballast, enclosure, controls and access safeguards.

Selection & Installation Notes

Before replacement, verify cavity clearance, 2G11 holder orientation, four-pin alignment and operating circuit against the equipment drawing. UV-C can seriously injure eyes and skin, so operate the lamp only inside equipment with effective containment, interlocks or equivalent access controls, lockout procedures and an exposure review. Compare related products in our UV-C germicidal lamp range.

Recommended Application

Toepassingen

  • Air Treatment Chambers: Install the selected lamp inside enclosed air-treatment equipment with matched electrical components and access safeguards.
  • Water Treatment Modules: Integreer de PL-L-lichtbron in afgeschermde reactorapparatuur die is ontworpen voor het gekozen model.
  • Closed Process Equipment: Gebruik het vervangbare component in samenstellingen die tijdens gebruik blootstelling aan UV-C voorkomen.
  • OEM Treatment Systems: Approve the complete lamp, circuit and enclosure definition before sampling or production.
Blijf
in contact

Vertel ons over uw markt- en productbehoeften

Deel uw markt, productinteresse, toepassing of geschatte hoeveelheid. Ons team kan u helpen sneller van productselectie naar offerte en bespreking van monsters te gaan.

Frequently Asked Questions?

Vind duidelijke antwoorden op veelgestelde vragen over productspecificaties, modelselectie, toepassingen en offertevereisten. Stuur ons voor projectspecifieke behoeften uw doelmarkt, vereiste hoeveelheid en belangrijkste specificaties.

Kan een PL-L UV-C-lamp worden gebruikt voor verlichting in een open ruimte?

Nee. UV-C kan ogen en huid ernstig beschadigen. Gebruik de lamp uitsluitend in apparatuur met effectieve afscherming, vergrendelingen en gecontroleerde onderhoudsprocedures.

Is the 2G11 holder included?

Nee. Het geleverde artikel is uitsluitend de lamp; de hoofdapparatuur levert de passende houder, ballast, behuizing, bedieningselementen en veiligheidsvoorzieningen.

Can a PL-L lamp replace a PL-S lamp?

Do not substitute by appearance alone. PL-L uses a long Φ18 return form and a 2G11 four-pin base; verify the physical interface, electrical circuit and equipment safeguards before replacement.

How should a replacement model be selected?

Match the complete model, Φ18 geometry, exact length, 2G11 base, operating circuit and ozone requirement to the approved equipment specification.

How should the UV-C intensity entries be used?

Treat them as lamp-component references. Measurement distance, geometry and test conditions are not specified, so do not use them for finished-system design or cross-model performance comparison.

When should a PL-L UV-C lamp be replaced?

De nominale levensduur bedraagt 8,000–10,000 uur. Volg het onderhoudsschema van de hoofdapparatuur en de gevalideerde systeemprocedure voor het vervangingstijdstip en een veilige omgang.

Featured Products

Scroll to Top

Send Us a Message

Laat uw contactgegevens en bericht achter. Ons team antwoordt per e-mail of via het contactkanaal van uw voorkeur.

Vertel ons over uw verlichtingsproject

Deel uw product-, toepassings- en inkoopvereisten. Ons verlichtingsteam reageert met geschikte opties en projectondersteuning.