Corpo de luminária tri-proof LED para tubo substituível
- Reusable Body During Relamping: A substituição de rotina das lâmpadas substitui a fonte de luz, mantendo a caixa instalada.
- Recess-Free Mounting: Metal rear brackets attach the linear body directly to ceilings or walls without a recessed cut-out.
- Independent Output Selection: As fontes de luz compatíveis G13 permitem escolher separadamente o fluxo luminoso e a temperatura de cor da caixa.
- One- or Two-Lamp Layouts: Corpos estreitos e largos suportam configurações de iluminação com um tubo e com dois tubos.
| Housing Type | Shell for separate G13 tubes; no integrated LED board |
|---|---|
| Series | M / O / G / GS / MS / HS |
| Formato do tubo | 1 ou 2 tubos T8 substituíveis |
| Tube Load Range | 18, 36 or 58 W per tube |
|---|---|
| Housing Lengths | 656-1562 mm |
| Protection | IP65 configured assembly |
Technical Specifications
Model Specifications
| Modelo | Series | Housing Dimensions (W x H x L) | Rated Tube Load | Clips | Mount Distance |
|---|---|---|---|---|---|
| XGYT8TPM-E136 | M | 85 x 86 x 1263 mm | 1 x 36 W | 4 | 470 mm |
| XGYT8TPM-E236 | M | 120 x 86 x 1263 mm | 2 x 36 W | 4 | 470 mm |
| XGYT8TPO-E118 | O | 85 x 94 x 660 mm | 1 x 18 W | 4 | 316 mm |
| XGYT8TPO-E218 | O | 135 x 94 x 660 mm | 2 x 18 W | 4 | 316 mm |
| XGYT8TPO-E136 | O | 85 x 94 x 1268 mm | 1 x 36 W | 8 | 566 mm |
| XGYT8TPO-E236 | O | 135 x 94 x 1268 mm | 2 x 36 W | 8 | 566 mm |
| XGYT8TPO-E158 | O | 85 x 94 x 1562 mm | 1 x 58 W | 12 | 800 mm |
| XGYT8TPO-E258 | O | 135 x 94 x 1562 mm | 2 x 58 W | 12 | 800 mm |
| XGYT8TPG-E118 | G | 82 x 94 x 658 mm | 1 x 18 W | 4 | 447 mm |
| XGYT8TPG-E218 | G | 125 x 94 x 658 mm | 2 x 18 W | 4 | 447 mm |
| XGYT8TPG-E136 | G | 82 x 94 x 1266 mm | 1 x 36 W | 8 | 860 mm |
| XGYT8TPG-E236 | G | 125 x 94 x 1266 mm | 2 x 36 W | 8 | 860 mm |
| XGYT8TPGS-E118 | GS | 80 x 90 x 656 mm | 1 x 18 W | 6 | 470 mm |
| XGYT8TPGS-E218 | GS | 115 x 90 x 656 mm | 2 x 18 W | 6 | 470 mm |
| XGYT8TPGS-E136 | GS | 80 x 90 x 1260 mm | 1 x 36 W | 10 | 750 mm |
| XGYT8TPGS-E236 | GS | 115 x 90 x 1260 mm | 2 x 36 W | 10 | 750 mm |
| XGYT8TPGS-E158 | GS | 80 x 90 x 1560 mm | 1 x 58 W | 12 | 1015 mm |
| XGYT8TPGS-E258 | GS | 115 x 90 x 1560 mm | 2 x 58 W | 12 | 1015 mm |
| XGYT8TPMS-E118 | MS | 70 x 90 x 656 mm | 1 x 18 W | 4 | 470 mm |
| XGYT8TPMS-E218 | MS | 110 x 90 x 656 mm | 2 x 18 W | 4 | 470 mm |
| XGYT8TPMS-E136 | MS | 70 x 90 x 1260 mm | 1 x 36 W | 10 | 750 mm |
| XGYT8TPMS-E236 | MS | 110 x 90 x 1260 mm | 2 x 36 W | 10 | 750 mm |
| XGYT8TPMS-E158 | MS | 70 x 90 x 1562 mm | 1 x 58 W | 12 | 1015 mm |
| XGYT8TPMS-E258 | MS | 110 x 90 x 1562 mm | 2 x 58 W | 12 | 1015 mm |
| XGYT8TPHS-E136 | HS | 70 x 84 x 1262 mm | 1 x 36 W | 8 | 470 mm |
| XGYT8TPHS-E236 | HS | 110 x 84 x 1262 mm | 2 x 36 W | 8 | 470 mm |
Housing dimensions are shown as W x H x L. Rated tube load describes the separate lamp arrangement, not the input power of an integrated luminaire. Match the T8 tube length, G13 holders and single- or double-end wiring before assembly.
Product Description
Product Details
Product Construction
A PC or PS cover closes over a HIPS, ABS or PC base that carries the G13 lampholders. Plastic or stainless-steel side clips and rubber or silicone sealing options complete the housing assembly. The matched cover, base, seal, clips and cable entry form the documented IP65 configuration.
Selection & Installation Notes
Use the external dimensions and bracket-center spacing to select the M, O, G, GS, MS or HS profile, housing length and width. Verify the T8 tube length, G13 pin fit, input end and internal wiring before assembly. The standard offering is the housing; specify separate tube supply when a complete lamp-and-housing set is required.
Recommended Application
Aplicações
- Warehouse Aisles: Completed single- or double-tube assemblies provide linear lighting along storage and picking routes.
- Production Workshops: Sealed housing-and-tube assemblies provide general lighting above assembly, processing and maintenance work areas.
- Parking Garages: Surface-mounted housing-and-tube assemblies illuminate vehicle lanes, parking bays and pedestrian routes.
- Service Corridors: Single- and double-tube assemblies provide continuous lighting through utility passages and plant access routes.
em contacto
- N.º 5 Fenghuang Road, Qianjiang Industrial Area, Dingqiao Town, Haining, Zhejiang 314413, China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Frequently Asked Questions?
Encontre respostas claras às perguntas frequentes sobre especificações de produtos, seleção de modelos, aplicações e requisitos de cotação. Para necessidades específicas de projetos, envie-nos o seu mercado de destino, a quantidade necessária e as principais especificações.
