Is the UGR < 19 option standard on every model?

It is listed as an option. Specify it in the order and verify the complete room layout because final glare depends on more than the luminaire.

Painel LED fino de emissão lateral

Q: How does a side-emission panel differ from a backlit panel?

Its LEDs feed light into a guide plate from the edges, allowing a 9 mm optical body. A backlit panel places LEDs behind the diffuser and usually has a deeper housing.

Q: Where is the driver installed if the panel is only 9 mm deep?

The driver is separate from the optical body. Confirm accessible ceiling space, cable routing and driver mounting before installation.

Q: Which model fits a 625 mm ceiling grid?

Use the 620 × 620 mm model for the corresponding metric module, but verify the actual tee spacing and support method.

Q: Is the UGR < 19 option standard on every model?

It is listed as an option. Specify it in the order and verify the complete room layout because final glare depends on more than the luminaire.

Q: Why does the 595 × 1195 mm model reach 72 W?

The 595 × 1195 mm format has a listed 50–72 W range, while the other sizes list 24–60 W. The final driver and output must be fixed for the ordered model.

Q: What OEM/ODM choices are available?

We can configure the selected housing size, power, efficacy target, CCT, CRI, driver, glare option, labels and packaging after sample approval.

This 9 mm side-emission LED panel guides light from the frame across a flat optical plate, producing a slim profile in four metric ceiling formats. We manufacture the series for OEM/ODM commercial projects, with the panel size, rated power, efficacy target, CCT, driver and optional glare requirement confirmed before sampling.

9 mm Side-Emission Body: Edge-fed light distribution keeps the optical panel shallow.
Four Metric Formats: Square and rectangular sizes cover several common ceiling-grid layouts.
Separate Driver Arrangement: O driver permanece fora do corpo ótico fino para instalação no plenum do teto.
Optional Glare Configuration: Pode ser especificada uma opção de baixo encandeamento para interiores orientados para ecrãs e tarefas.

Construção	Painel de guia de luz de emissão lateral
Profundidade da caixa	9 mm
Panel formats	595×595 / 620×620 / 295×1195 / 595×1195 mm
Potência nominal	24–60 W / 50–72 W

Eficácia luminosa	80–160 lm/W
CCT	3000–6500 K
Rated life	50,000 h

LED side-emission panels installed in an office corridor

Technical Specifications

Model Specifications

Model No.	Dimensions (mm)	Rated Power	Efficacy	CCT	Housing Depth
XGYPL-SE-6060-E40	595×595×9	24–60 W	80–160 lm/W	3000–6500 K	9 mm
XGYPL-SE-6262-E40	620×620×9	24–60 W	80–160 lm/W	3000–6500 K	9 mm
XGYPL-SE-30120-E40	295×1195×9	24–60 W	80–160 lm/W	3000–6500 K	9 mm
XGYPL-SE-60120-E60	595×1195×9	50–72 W	80–160 lm/W	3000–6500 K	9 mm

Product Description

Product Details

Product Construction

The side-emission assembly guides light from the perimeter through a flat optical plate inside a 9 mm panel body. A separate driver sits outside the optical body, while four square and rectangular formats share the same slim ceiling profile.

Selection & Installation Notes

Choose the exact panel format for the measured ceiling grid, then confirm support, cable routing and accessible space for the separate driver. Specify the ordered power, efficacy target, CCT, CRI, driver and optional glare configuration before sampling. Treat the listed power values as order options unless a field-selectable driver is specifically approved. For related low-glare and sensor-ready formats, compare our project-grade LED panels.

Recommended Application

Aplicações

Offices and Meeting Rooms: Utilize painéis de teto finos em zonas de postos de trabalho, espaços de reunião e salas de apresentação.
Corridors and Reception Areas: O corpo ótico de 9 mm é adequado para zonas interiores de circulação e acolhimento com detalhes de teto pouco profundos.
Schools and Libraries: Os formatos quadrados e lineares são adequados para salas de aula, áreas de estudo e zonas de circulação.
Replacement Ceiling Grids: Four metric formats cover common square and rectangular module layouts.

Mantenha-se
em contacto

Indique-nos o Seu Mercado e as Necessidades de Produto

Partilhe o seu mercado, interesse de produto, aplicação ou quantidade estimada. A nossa equipa pode ajudá-lo a avançar mais rapidamente da seleção do produto para a cotação e discussão de amostras.

Frequently Asked Questions?

Encontre respostas claras às perguntas frequentes sobre especificações de produtos, seleção de modelos, aplicações e requisitos de cotação. Para necessidades específicas de projetos, envie-nos o seu mercado de destino, a quantidade necessária e as principais especificações.

Em que difere um painel de emissão lateral de um painel retroiluminado?

Its LEDs feed light into a guide plate from the edges, allowing a 9 mm optical body. A backlit panel places LEDs behind the diffuser and usually has a deeper housing.

Where is the driver installed if the panel is only 9 mm deep?

The driver is separate from the optical body. Confirm accessible ceiling space, cable routing and driver mounting before installation.

Which model fits a 625 mm ceiling grid?

Utilize o modelo de 620 × 620 mm para o módulo métrico correspondente, mas verifique o espaçamento real da estrutura em T e o método de suporte.

A opção UGR < 19 é padrão em todos os modelos?

Está indicado como uma opção. Especifique-a na encomenda e verifique o layout completo da divisão, pois o encandeamento final depende de mais fatores do que a luminária.

Why does the 595 × 1195 mm model reach 72 W?

O formato de 595 × 1195 mm tem uma gama indicada de 50–72 W, enquanto os restantes tamanhos indicam 24–60 W. O driver e a saída finais devem ser definidos para o modelo encomendado.

What OEM/ODM choices are available?

We can configure the selected housing size, power, efficacy target, CCT, CRI, driver, glare option, labels and packaging after sample approval.