Luz solar de parede XGYSWL-TRNG-E0.2 IP54

A XGYSWL-TRNG-E0.2 é uma luz solar de parede compacta IP54, com fluxo de 30 lm e controlo por sensor IR. O seu painel monocristalino de 5.5 V / 1.1 W carrega uma bateria interna 18650 de 2000 mAh para iluminação exterior de orientação sem ligação à rede elétrica.

Cable-Free Retrofit: The self-contained power system avoids a new mains feed at suitable exterior walls.
Low-Level Wayfinding: The light provides orientation along entrances, paths and utility routes.
Approach-Responsive Operation: Sensor-controlled output supports movement along the intended access route.
Daylight-to-Night System: The panel and internal cell collect daytime energy for after-dark operation.

Dimensions	180×90×73.7 mm
Potência nominal / Saída	0.2 W / 30 lm
Solar Panel	5.5 V / 1.1 W monocrystalline

Bateria	18650 2000 mAh
Corpo / Proteção	Ferro SPCC + PC / IP54
Sensor / Controlo	Sensor IR

XGYSWL-TRNG-E0.2 IP54 solar wall light product image

XGYSWL-TRNG-E0.2 low-output solar wall light installed beside an exterior entrance at dusk

Technical Specifications

Model Specifications

Model No.	Dimensions	Rated Power	Saída	Solar Panel	Bateria	Protection
XGYSWL-TRNG-E0.2	180×90×73.7 mm	0.2 W	30 lm	5.5 V / 1.1 W	18650 2000 mAh	IP54

Product Description

Product Details

Product Construction

A XGYSWL-TRNG-E0.2 utiliza um invólucro mural em ferro SPCC e PC de 180 × 90 × 73.7 mm, com superfície superior de captação de energia e secção de iluminação inferior.

Selection & Installation Notes

Confirm wall strength, drainage, fixing access and the required night operating mode before installation. Match the mounting exposure to the IP54 rating and retain access for cleaning and maintenance. Compare related products in our solar wall lights range.

Recommended Application

Aplicações

Residential Entrances: Sensor control provides low-level guidance at sun-exposed exterior doorways.
Garden Side Passages: The 30 lm output supports orientation along paths beside homes and small buildings.
Boundary Walls: Solar charging serves wall positions where a mains cable is unavailable.
Outdoor Utility Areas: The compact enclosure suits protected service locations with clear daylight exposure.

Mantenha-se
em contacto

Indique-nos o Seu Mercado e as Necessidades de Produto

Partilhe o seu mercado, interesse de produto, aplicação ou quantidade estimada. A nossa equipa pode ajudá-lo a avançar mais rapidamente da seleção do produto para a cotação e discussão de amostras.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

How much direct sun does XGYSWL-TRNG-E0.2 need?

Install the panel where it receives unobstructed daylight. Shade, winter sun angle and dirt on the panel reduce the available charging energy.

Will it work through a full night?

Operating time depends on the daily solar charge, battery condition, ambient temperature and selected sensor mode. Verify the required night profile at the installation site.

Para onde deve estar orientado o sensor?

Aim the IR sensor toward the expected approach path and away from moving plants, traffic or heat sources that could cause unwanted activation.

Can it be installed in fully exposed rain?

It is rated IP54. Match the mounting position to that rating and keep the product away from water jets or immersion.

What should be checked before fixing the product?

Check wall strength, panel sun exposure, sensor direction, drainage and the required night operating mode before final fixing.

Que itens OEM/ODM podem ser configurados?

We can configure supported housing finish, CCT, sensing sequence, labels and packaging after the electrical and environmental sample is approved.