New Lights

XGYSWL-WFLEN-E0.3 IP54 Solar Wall Light

The XGYSWL-WFLEN-E0.3 is an IP54 solar wall light with a 30 lm output and IR sensor control. Its 5.5 V / 1 W monocrystalline panel charges an internal 18650 2000 mAh battery for mains-free outdoor orientation lighting.
  • Mains-Free Placement: Integrated solar charging supports wall locations without a wired power feed.
  • Orientation Lighting: The 30 lm output provides low-level guidance around entrances and paths.
  • Motion-Triggered Use: Detection reserves light output for nearby movement.
  • Round Wall Form: The circular enclosure requires wall area and projection clearance before final fixing.
DimensionsØ201×109 mm
Rated Power / Output0.3 W / 30 lm
Solar Panel5.5 V / 1 W monocrystalline
Battery18650 2000 mAh
Body / ProtectionSPCC iron + PC / IP54
Sensor / ControlIR sensor
Request a Quote
XGYSWL-WFLEN-E0.3 IP54 solar wall light product image
XGYSWL-WFLEN-E0.3 low-output solar wall light installed beside an exterior entrance at dusk

Technical Specifications

Model Specifications

Model No.DimensionsRated PowerOutputSolar PanelBatteryProtection
XGYSWL-WFLEN-E0.3Ø201×109 mm0.3 W30 lm5.5 V / 1 W18650 2000 mAhIP54

Product Description

Product Details

Product Construction

The round SPCC iron and PC enclosure combines the solar panel, rechargeable battery, LED light and IR sensor in a single wall-mounted assembly.

Selection & Installation Notes

Mount the panel where it receives unobstructed daylight, with the sensor facing the intended approach route. Confirm mounting strength, projection clearance, drainage and the required night operating mode before final fixing. The IP54 rating defines the outdoor exposure boundary. Compare related products in our solar wall lights range.

Recommended Application

Applications

  • Residential Entrances: Sensor control provides low-level guidance at sun-exposed exterior doorways.
  • Garden Side Passages: The 30 lm output supports orientation along paths beside homes and small buildings.
  • Boundary Walls: Solar charging serves wall positions where a mains cable is unavailable.
  • Outdoor Utility Areas: The round enclosure suits protected service locations with clear daylight exposure.
Keep
in touch
  • No.5 Fenghuang Road Qianjiang Industrial Area Dingqiao Town Haining Zhejiang 314413 China
  • +86-18358315743
  • R.KOO@NEW-LIGHTS.COM

Tell Us Your Market and Product Needs

Share your market, product interest, application, or estimated quantity. Our team can help you move faster from product selection to quotation and sample discussion.

By submitting this form, you ask New Lights Lighting Technology Co., Ltd. to use the information you provide to respond to your inquiry and manage related business communications. See our Privacy Policy. Optional marketing emails require the separate choice below.

Facebook Youtube Linkedin Instagram

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

How much direct sun does XGYSWL-WFLEN-E0.3 need?

Install the panel where it receives unobstructed daylight. Shade, winter sun angle and dirt on the panel reduce the available charging energy.

Will it work through a full night?

Operating time depends on the daily solar charge, battery condition, ambient temperature and selected sensor mode. Verify the required night profile at the installation site.

Where should the sensor face?

Aim the IR sensor toward the expected approach path and away from moving plants, traffic or heat sources that could cause unwanted activation.

Can it be installed in fully exposed rain?

It is rated IP54. Match the mounting position to that rating and keep the product away from water jets or immersion.

What should be checked before fixing the product?

Check mounting strength, panel sun exposure, sensor direction, projection clearance, drainage and the required night operating mode before final fixing.

Which OEM/ODM items can be configured?

We can configure supported housing finish, CCT, sensing sequence, labels and packaging after the electrical and environmental sample is approved.

Featured Products

XGYSGL-YD404-E3 post-mount solar light, 180 mm diameter and 610 mm high
Compact Wall, Base and Post-Mount Solar Light
XGYSWL-MYSW-ST01-E2.5 open-frame solar wall light, 163 x 111 x 100 mm
IP65 Open-Frame Solar Wall Light with Motion Sensor
XGYSWL-MYSW-HT02-E0.8 vertical solar wall light, 162 x 100 x 42 mm
IP65 Vertical Solar Wall Light with Light Sensor
XGYSWL-MYSW-STC03-E2.5 IP65 compact solar wall light, 152×96×84 mm
IP65 Compact Solar Wall Light with Motion Sensor
Black circular solar wall light with sensor on white background
IP65 Circular Solar Wall Light
XGYSWL-LTRP-E0.15 IP54 solar wall light product image
XGYSWL-LTRP-E0.15 IP54 Solar Wall Light
Scroll to Top

Send Us a Message

Leave your contact details and message. Our team will reply by email or through your preferred contact method.

By submitting this form, you ask New Lights Lighting Technology Co., Ltd. to use the information you provide to respond to your inquiry and manage related business communications. See our Privacy Policy. Optional marketing emails require the separate choice below.

Tell Us About Your Lighting Project

Share your product, application and purchasing requirements. Our lighting team will reply with suitable options and project support.

By submitting this form, you ask New Lights Lighting Technology Co., Ltd. to use the information you provide to respond to your inquiry and manage related business communications. See our Privacy Policy. Optional marketing emails require the separate choice below.