Stepless-Dimming Magnetic Sensor Light Bars – Z0-LED

XGYUCL-Z0-LED rechargeable magnetic sensor light bars come in 210 and 297 mm lengths with 3 W power, Type-C charging and stepless dimming. M1 provides continuous light, while M2 combines darkness detection with infrared motion sensing.

Continuous brightness adjustment: both Z0-LED models support stepless dimming.
Two operating modes: M1 keeps the light on, while M2 uses darkness detection with infrared motion sensing.
Consistent efficacy: both length variants are listed at 100 lm/W.
Wide white-light range: the series covers 3000–6500 K color temperature.

Body Lengths	210 / 297 mm
Rated Power	3 W each
Battery Capacity	1200 / 1800 mAh

CCT / Efficacy	3000–6500 K / 100 lm/W
Charging / Mounting	Type-C / two magnetic adhesive plates
Control / Modes	Stepless dimming; M1 continuous; M2 darkness + IR sensing

White stepless-dimming magnetic sensor light bar on white background

XGYUCL-Z0-LED-210MM-CCT-E7 rechargeable magnetic sensor light bar, 210 × 38 × 23 mm

Z0-LED rechargeable magnetic sensor light bar installed beneath a kitchen cabinet

XGYUCL-Z0-LED-297MM-CCT-E11 rechargeable magnetic sensor light bar, 297 × 38 × 23 mm

Technical Specifications

Model Specifications

Model	Dimensions	Power	Battery	Efficacy	Dimming	CCT	Charging
XGYUCL-Z0-LED-210MM-CCT-E7	210 × 38 × 23 mm	3 W	1200 mAh	100 lm/W	Stepless Dimming	3000–6500 K	Type-C
XGYUCL-Z0-LED-297MM-CCT-E11	297 × 38 × 23 mm	3 W	1800 mAh	100 lm/W	Stepless Dimming	3000–6500 K	Type-C

Product Description

Product Details

Product Construction

The rechargeable bar uses an ABS housing, a Type-C charging port and two magnetic adhesive plates. The plates remain on the mounting surface while the light is removed for charging.

Selection & Installation Notes

Select the 210 or 297 mm body by the available mounting space, then match its 1200 or 1800 mAh battery capacity. Keep the sensor end clear of cabinet lips and door edges, test the intended approach direction, and clean the surface before fixing both magnetic plates. Compare related products in our cabinet lights range.

Recommended Application

Applications

Under-Cabinet Task Lighting: Mount the slim bar beneath kitchen cabinets with the sensor clear of the front lip.
Wardrobes And Closets: Use M2 mode for night-time motion response inside storage areas.
Shelf Display Lighting: Choose the body length that fits within the shelf opening and keeps the diffuser unobstructed.
Bedside Route Lighting: Install the rechargeable bar along an indoor night route where the infrared sensor faces the approach path.

Keep
in touch

Tell Us Your Market and Product Needs

Share your market, product interest, application, or estimated quantity. Our team can help you move faster from product selection to quotation and sample discussion.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

Which Z0-LED length should I choose?

Choose by usable mounting space: the body lengths are 210 and 297 mm. Both are rated at 3 W, with 1200 and 1800 mAh batteries respectively.

How do M1 and M2 operate?

M1 keeps the light continuously on. M2 combines darkness detection with infrared motion sensing for night-time response.

Does each Z0-LED model support stepless dimming?

Yes. Both Z0-LED length variants support continuous brightness adjustment.

How is the light removed for charging?

Pull the light bar away from its two magnetic adhesive plates, charge it through the Type-C port, and return it in the same orientation.

Can the sensor be hidden behind a cabinet lip?

No. Keep the sensor exposed to the intended approach path and test the installation before fixing both magnetic plates.

How does battery capacity vary by length?

The 210 mm model has a 1200 mAh battery, while the 297 mm model has an 1800 mAh battery. Both models are rated at 3 W.