Black Three-Lens Rechargeable Sensor Cabinet Light

This black three-lens rechargeable sensor cabinet light uses separated PMMA optics, a three-step slide control and two operating modes for shelves, wardrobes and cabinet work zones. Four lengths from 200 to 600 mm pair with Type-C charging and removable magnetic mounting.

Separated Light Pattern: Three round elements create distinct illuminated positions along the face instead of one continuous luminous strip.
Portable Recharge Access: The bar releases from its holding points so the charging connection remains accessible away from the mounted position.
On-Demand or Sensor Response: One setting keeps the light active, while another responds to infrared movement under low ambient light.
Model-Based Electrical Pairing: Each catalogued size carries its own defined power and stored-energy combination.

Length Range	200 / 300 / 400 / 600 mm
Housing Profile	40 × 11 mm
Optics	Three PMMA lenses
CCT	3000–6500 K

Control	Three-step slide control
Charging & Mounting	Type-C; two magnetic adhesive plates
Housing Finish	Black

XGYUCL-Z0-200CAJMYGYD-E1 black three-lens rechargeable sensor cabinet light, 200 × 40 × 11 mm

black three-lens rechargeable sensor cabinet light mounted above a home office desk

XGYUCL-Z0-300CAJMYGYD-E1 black three-lens rechargeable sensor cabinet light, 300 × 40 × 11 mm

XGYUCL-Z0-400CAJMYGYD-E1 black three-lens rechargeable sensor cabinet light, 400 × 40 × 11 mm

XGYUCL-Z0-600CAJMYGYD-E1 black three-lens rechargeable sensor cabinet light, 600 × 40 × 11 mm

Technical Specifications

Model Specifications

Model	Dimensions	Power	Battery	Efficacy	CCT	Control
XGYUCL-Z0-200CAJMYGYD-E1	200 × 40 × 11 mm	0.5 W	600 mAh	100 lm/W	3000–6500 K	Three-step slide control
XGYUCL-Z0-300CAJMYGYD-E1	300 × 40 × 11 mm	0.8 W	900 mAh	100 lm/W	3000–6500 K	Three-step slide control
XGYUCL-Z0-400CAJMYGYD-E1	400 × 40 × 11 mm	1.2 W	1200 mAh	100 lm/W	3000–6500 K	Three-step slide control
XGYUCL-Z0-600CAJMYGYD-E1	600 × 40 × 11 mm	1.2 W	1500 mAh	100 lm/W	3000–6500 K	Three-step slide control

Product Description

Product Details

Product Construction

The black aluminum bar places three round PMMA lenses along its face, with ABS end caps closing the 40 × 11 mm housing profile.

Selection & Installation Notes

Before installation, verify the available span, substrate suitability and clearance around the control and sensor end. Keep the sensing area unobstructed and leave access to detach the bar for charging. Compare related formats in our under cabinet lights range.

Recommended Application

Applications

Display Shelves: Positions three separated light points across merchandise or collection shelves.
Wardrobe Interiors: Uses night-plus-IR sensing when movement occurs in low ambient light.
Kitchen Work Zones: Mounts beneath upper cabinets above food-preparation surfaces.
Home Office Shelves: Provides localized lighting above a desk from a slim black housing.

Keep
in touch

Tell Us Your Market and Product Needs

Share your market, product interest, application, or estimated quantity. Our team can help you move faster from product selection to quotation and sample discussion.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

Which length should I choose?

Measure the clear mounting span, then select the 200, 300, 400 or 600 mm model and review its matched power and battery value.

Do all four lengths use the same rated power?

No. The 200 mm model is 0.5 W, the 300 mm model is 0.8 W, and the 400 and 600 mm models are both 1.2 W.

How does the three-lens version distribute light?

It uses three separated PMMA lenses rather than one continuous diffuser across the bar.

Which operating modes are available?

The available modes are always-on operation and night-plus-IR sensing.

How is the light mounted and charged?

Two magnetic adhesive plates retain the housing; detach the bar and use its Type-C connection for charging.

What should be confirmed before production?

Confirm the exact length model, black finish, CCT, three-step control behavior, magnetic-plate inclusion, labels, packaging and approved sample.