Lampadaires solaires LED tout-en-un
- Integrated Solar Assembly: The solar panel, battery, controller and LED optics share one pole-mounted housing.
- Five Scaled Housings: Five fixture and panel sizes cover the listed 30-150 W configurations.
- Matched Energy Packages: Each configuration pairs a specified solar-panel power with a 5000, 10000 or 15000 mAh battery.
- Roadway Control Options: Les modes lumière, induction et télécommande répondent à différentes exigences de fonctionnement nocturne.
| power | 30–150 W |
|---|---|
| Hauteur de montage | 2–8 m by configuration |
| Solar panel | 6 V / 6–18 W |
| Batterie | 5000–15000 mAh |
|---|---|
| Commande | Lumière / induction / télécommande |
| Construction | Panneau et luminaire intégrés |
Technical Specifications
Model Specifications
| Model No. | Puissance | Size | Solar Panel | Dimensions du panneau | Batterie | Hauteur de montage |
|---|---|---|---|---|---|---|
| XGYSSL-XWWZ-E30 | 30W | 39 × 20 | 6W/6V | 301 × 187 | 5000mAh | 2-5M |
| XGYSSL-XWWZ-E60 | 60W | 49 × 21 | 8W/6V | 398 × 213 | 5000mAh | 3-5M |
| XGYSSL-XWWZ-E90 | 90W | 62 × 24 | 12W/6V | 508 × 231 | 10000mAh | 4-6M |
| XGYSSL-XWWZ-E120 | 120W | 72 × 24 | 15W/6V | 608 × 231 | 15000mAh | 5-6M |
| XGYSSL-XWWZ-E150 | 150W | 82 × 24 | 18W/6V | 708 × 231 | 15000mAh | 6-8M |
Product Description
Product Details
Product Construction
Le panneau solaire, la batterie, le contrôleur et l’optique LED sont intégrés dans un seul ensemble monté sur poteau. Cinq tailles de boîtier et de panneau prennent en charge les configurations indiquées de 30-150 W.
Selection & Installation Notes
Adaptez le modèle aux indications de montage de 2-8 m, à l’interface de poteau disponible et au mode de fonctionnement requis. Positionnez la surface de recharge pour une exposition utile à la lumière du jour et comparez les formats associés dans notre solar street lights range.
Recommended Application
Applications
- Industrial Access Roads: Utilisez le format tout-en-un monté sur poteau le long des voies d’accès d’usine et des parcours périphériques.
- Residential Internal Streets: Arrange model-specific mounting heights along community roads and shared circulation lanes.
- Remote Parking Approaches: Position the integrated solar units along parking entrances and approach roads without mains wiring at each fitting.
- Rural Service Routes: Apply the solar street-light format along village links and low-infrastructure service roads.
en contact
- No.5 Fenghuang Road Qianjiang Industrial Area Dingqiao Town Haining Zhejiang 314413 China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Indiquez-nous votre marché et vos besoins en produits
Indiquez votre marché, les produits qui vous intéressent, l’application ou la quantité estimée. Notre équipe peut vous aider à accélérer le passage de la sélection des produits au devis et à l’échange sur les échantillons.
Frequently Asked Questions?
Trouvez des réponses claires aux questions fréquentes sur les spécifications produit, le choix des modèles, les applications et les exigences de devis. Pour des besoins propres à un projet, envoyez-nous votre marché cible, la quantité requise et les principales spécifications.
No. Use the exact mounting-height row plus roadway width, target illuminance, uniformity and photometric data. Wattage does not define distribution or spacing by itself.
No. Actual operation depends on daylight hours, panel angle and shade, weather, temperature, battery condition, control mode and nightly activation. Compare the site profile with the selected panel, battery and control configuration before ordering.
Confirm sleeve and pole dimensions, structural and wind loads, orientation, solar access, maintenance access and the site’s required mounting height.
Lower-output or standby periods reduce battery demand, while frequent high-output activation uses more stored energy. Specify the required control program before production.
IP65 applies to the approved integrated housing when installed in its intended orientation; pole interfaces and service openings must remain sealed.
We can manufacture the approved housing size, mounting interface, panel, battery, control program, labels and packaging after the road-lighting model is confirmed.




