New Lights

Zintegrowane solarne lampy uliczne LED

All-in-one solar street-light series integrating the panel, battery, controller and LED optics in five pole-mounted housings for off-grid access roads and site routes. We manufacture 30–150 W models for 2–8 m mounting heights, with 6–18 W solar panels, 5000–15000 mAh batteries and light, induction or remote-control modes.
  • Integrated Solar Assembly: The solar panel, battery, controller and LED optics share one pole-mounted housing.
  • Five Scaled Housings: Five fixture and panel sizes cover the listed 30-150 W configurations.
  • Matched Energy Packages: Each configuration pairs a specified solar-panel power with a 5000, 10000 or 15000 mAh battery.
  • Roadway Control Options: Tryby światła, indukcji i zdalnego sterowania obsługują różne wymagania dotyczące nocnej pracy.
power30–150 W
Wysokość montażu2–8 m by configuration
Solar panel6 V / 6–18 W
Akumulator5000–15000 mAh
SterowanieŚwiatło / indukcja / pilot
KonstrukcjaZintegrowany panel i oprawa

Technical Specifications

Model Specifications

Model No.MocSizeSolar PanelWymiary paneluAkumulatorWysokość montażu
XGYSSL-XWWZ-E3030W39 × 206W/6V301 × 1875000mAh2-5M
XGYSSL-XWWZ-E6060W49 × 218W/6V398 × 2135000mAh3-5M
XGYSSL-XWWZ-E9090W62 × 2412W/6V508 × 23110000mAh4-6M
XGYSSL-XWWZ-E120120W72 × 2415W/6V608 × 23115000mAh5-6M
XGYSSL-XWWZ-E150150W82 × 2418W/6V708 × 23115000mAh6-8M

Product Description

Product Details

Product Construction

Panel solarny, akumulator, kontroler i optyka LED są zintegrowane w jednym zespole montowanym na słupie. Pięć rozmiarów obudowy i panelu obsługuje wymienione konfiguracje 30-150 W.

Selection & Installation Notes

Dopasuj model do podanych wytycznych montażowych 2-8 m, dostępnego interfejsu słupa i wymaganego trybu pracy. Ustaw powierzchnię ładowania tak, aby zapewnić użyteczną ekspozycję na światło dzienne, i porównaj powiązane formaty w naszej solar street lights range.

Recommended Application

Zastosowania

  • Industrial Access Roads: Stosuj zintegrowaną konstrukcję montowaną na słupie wzdłuż dróg dojazdowych do zakładu i tras obwodowych.
  • Residential Internal Streets: Arrange model-specific mounting heights along community roads and shared circulation lanes.
  • Remote Parking Approaches: Position the integrated solar units along parking entrances and approach roads without mains wiring at each fitting.
  • Rural Service Routes: Apply the solar street-light format along village links and low-infrastructure service roads.
Pozostań
w kontakcie

Powiedz nam o swoim rynku i potrzebach produktowych

Podaj swój rynek, interesujące Cię produkty, zastosowanie lub szacowaną ilość. Nasz zespół może pomóc szybciej przejść od wyboru produktu do wyceny i omówienia próbek.

Frequently Asked Questions?

Znajdź jasne odpowiedzi na najczęstsze pytania dotyczące specyfikacji produktów, wyboru modeli, zastosowań i wymagań ofertowych. W przypadku potrzeb specyficznych dla projektu prześlij nam swój rynek docelowy, wymaganą ilość i kluczowe specyfikacje.

Czy sama moc może określić rozstaw słupów?

No. Use the exact mounting-height row plus roadway width, target illuminance, uniformity and photometric data. Wattage does not define distribution or spacing by itself.

Will the listed solar runtime be the same in every season?

No. Actual operation depends on daylight hours, panel angle and shade, weather, temperature, battery condition, control mode and nightly activation. Compare the site profile with the selected panel, battery and control configuration before ordering.

Co należy sprawdzić przed montażem na słupie?

Confirm sleeve and pole dimensions, structural and wind loads, orientation, solar access, maintenance access and the site’s required mounting height.

Jak tryby indukcji i pilota wpływają na autonomię?

Lower-output or standby periods reduce battery demand, while frequent high-output activation uses more stored energy. Specify the required control program before production.

Co obejmuje deklaracja ochrony do zastosowań zewnętrznych?

IP65 applies to the approved integrated housing when installed in its intended orientation; pole interfaces and service openings must remain sealed.

What can New Lights configure for an OEM/ODM program?

We can manufacture the approved housing size, mounting interface, panel, battery, control program, labels and packaging after the road-lighting model is confirmed.

Featured Products

Scroll to Top

Send Us a Message

Pozostaw swoje dane kontaktowe i wiadomość. Nasz zespół odpowie e-mailem lub wybraną przez Ciebie metodą kontaktu.

Opowiedz nam o swoim projekcie oświetleniowym

Podaj informacje o produkcie, zastosowaniu i wymaganiach zakupowych. Nasz zespół oświetleniowy odpowie, przedstawiając odpowiednie opcje i wsparcie projektowe.