Applique solaire XGYSWL-TRNG-E0.2 IP54

Le XGYSWL-TRNG-E0.2 est une applique solaire compacte IP54, avec un flux de 30 lm et une commande par capteur IR. Son panneau monocristallin de 5.5 V / 1.1 W charge une batterie interne 18650 2000 mAh pour un éclairage d'orientation extérieur sans raccordement au réseau.

Cable-Free Retrofit: The self-contained power system avoids a new mains feed at suitable exterior walls.
Low-Level Wayfinding: The light provides orientation along entrances, paths and utility routes.
Approach-Responsive Operation: Sensor-controlled output supports movement along the intended access route.
Daylight-to-Night System: The panel and internal cell collect daytime energy for after-dark operation.

Dimensions	180×90×73.7 mm
Puissance nominale / sortie	0.2 W / 30 lm
Solar Panel	5.5 V / 1.1 W monocrystalline

Batterie	18650 2000 mAh
Corps / Protection	Fer SPCC + PC / IP54
Capteur / Commande	Capteur IR

XGYSWL-TRNG-E0.2 IP54 solar wall light product image

XGYSWL-TRNG-E0.2 low-output solar wall light installed beside an exterior entrance at dusk

Technical Specifications

Model Specifications

Model No.	Dimensions	Rated Power	Sortie	Solar Panel	Batterie	Protection
XGYSWL-TRNG-E0.2	180×90×73.7 mm	0.2 W	30 lm	5.5 V / 1.1 W	18650 2000 mAh	IP54

Product Description

Product Details

Product Construction

Le XGYSWL-TRNG-E0.2 utilise un boîtier mural en fer SPCC et PC de 180 × 90 × 73.7 mm, avec une surface supérieure de captation d'énergie et une section d'éclairage inférieure.

Selection & Installation Notes

Confirm wall strength, drainage, fixing access and the required night operating mode before installation. Match the mounting exposure to the IP54 rating and retain access for cleaning and maintenance. Compare related products in our solar wall lights range.

Recommended Application

Applications

Residential Entrances: Sensor control provides low-level guidance at sun-exposed exterior doorways.
Garden Side Passages: The 30 lm output supports orientation along paths beside homes and small buildings.
Boundary Walls: Solar charging serves wall positions where a mains cable is unavailable.
Outdoor Utility Areas: The compact enclosure suits protected service locations with clear daylight exposure.

Restons
en contact

Indiquez-nous votre marché et vos besoins en produits

Indiquez votre marché, les produits qui vous intéressent, l’application ou la quantité estimée. Notre équipe peut vous aider à accélérer le passage de la sélection des produits au devis et à l’échange sur les échantillons.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

How much direct sun does XGYSWL-TRNG-E0.2 need?

Install the panel where it receives unobstructed daylight. Shade, winter sun angle and dirt on the panel reduce the available charging energy.

Will it work through a full night?

Operating time depends on the daily solar charge, battery condition, ambient temperature and selected sensor mode. Verify the required night profile at the installation site.

Vers où le capteur doit-il être orienté ?

Aim the IR sensor toward the expected approach path and away from moving plants, traffic or heat sources that could cause unwanted activation.

Can it be installed in fully exposed rain?

It is rated IP54. Match the mounting position to that rating and keep the product away from water jets or immersion.

What should be checked before fixing the product?

Check wall strength, panel sun exposure, sensor direction, drainage and the required night operating mode before final fixing.

Quels éléments OEM/ODM peuvent être configurés ?

We can configure supported housing finish, CCT, sensing sequence, labels and packaging after the electrical and environmental sample is approved.