Proiettore LED IP65 per uso generale

Q: Is the 110-degree beam intended for long-throw lighting?

No. It is a broad flood distribution for nearby area lighting. Use a project lighting layout to verify aiming, spill and spacing.

General-purpose IP65 LED flood lights for entrances, yards, parking areas and selected security-lighting points. Six 10 to 100 W sizes use a 110-degree beam, with an optional infrared sensor for presence-triggered control.

Separate Sensor Module: The optional infrared detector sits below the light head to monitor the selected approach area.
Bracket-Adjusted Aiming: The rear mounting bracket sets the flood-light direction for the selected surface and target zone.
Recessed Reflector Face: The LED emitters sit inside a shaped front cavity that directs light away from the housing.
Scaled Housing Family: Each rated-power reference has its own matching body dimensions rather than sharing one enclosure.

Power range	10 / 20 / 30 / 50 / 70 / 100 W
Protection	IP65
Efficienza luminosa	90–120 lm/W
Temperatura di colore	3000–6500 K

Fascio / CRI	110° / Ra80
Controllo	Standard / optional IR sensor
Cable	0.15 m H05RN-F3G 1.00 mm²

General-Purpose IP65 LED Flood Light product image

General-Purpose IP65 LED Flood Light in a realistic application

Technical Specifications

Model Specifications

Modello	Dimensioni L×H×P	Potenza	Cable	Efficacy	CCT
XGYFL-XRGL-E10	90 × 70 × 28 mm	10 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRGL-E20	118 × 90 × 28 mm	20 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRGL-E30	148 × 120 × 28 mm	30 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRGL-E50	178 × 150 × 28 mm	50 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRGL-E70	218 × 35 × 180 mm	70 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRGL-E100	250 × 215 × 30 mm	100 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K

Product Description

Product Details

Product Construction

The family uses six size-specific housings with a rear aiming bracket and a recessed reflector face. Each reference has one fixed rated power, while the optional infrared detector sits below the light head on presence-controlled versions.

Selection & Installation Notes

Choose the standard or IR sensor version first, then set power and spacing from the required illuminance, mounting height and glare limits. Confirm the selected housing dimensions, keep the short supply lead within reach of a sealed junction and use fixings suited to the substrate. For related housing and output choices, compare our general LED flood lights.

Recommended Application

Applicazioni

Building Entrances: Provides broad local illumination around doors, steps and approach areas.
Industrial Yards: Adds fixed area lighting around service routes and exterior work points.
Parking Areas: Supports perimeter and local parking-zone lighting with bracket-adjusted aiming.
Security Lighting: Uses the optional IR sensor version for presence-triggered lighting at selected access points.

Rimani
in contatto

Descrivici le esigenze del tuo mercato e dei tuoi prodotti

Condividi il tuo mercato, l’interesse per il prodotto, l’applicazione o la quantità stimata. Il nostro team può aiutarti ad accelerare il passaggio dalla selezione del prodotto alla quotazione e alla discussione sui campioni.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

When should the optional IR sensor version be used?

Use it where presence-triggered switching is required and the sensor can view the intended approach. Check detection range, delay and daylight response at the final mounting position.

How should I choose among the 10 to 100 W models?

Start with mounting height, target illuminance, spacing and glare limits. Several lower-power fittings may provide more uniform coverage than one larger head.

Is the 110-degree beam intended for long-throw lighting?

No. Ha una distribuzione luminosa ampia per l'illuminazione di aree vicine. Utilizzare un progetto illuminotecnico per verificare puntamento, dispersione luminosa e spaziatura.

What does IP65 require from the installation?

IP65 applies to the rated fixture assembly. The short supply cable, junction and external connection also need sealing and protection suitable for their exposure.

Quale cavo è fornito con ciascun modello?

All six models list a 0.15 m H05RN-F3G 1.00 mm² rubber cable. Plan the junction position within reach of that lead.

Quali certificazioni si applicano a questa serie?

CE, IECEE CB, RoHS and ErP marks apply to this series. Confirm the exact market and model scope in the order documentation.