Proiettore LED IP65 ad alta emissione

Q: Is the 110-degree beam intended for long-throw lighting?

No. It is a broad flood distribution. Verify high-mount coverage, spill light and glare with project photometry.

High-output fixed LED flood-light family for elevated mounting and large exterior areas. Six models cover factory yards, loading aprons, open storage areas and other wide-area lighting layouts.

Aluminum Heat-Dissipation Body: The housing provides a large metal surface around the higher-power light engine.
High-Transmission Front Glass: Tempered glass protects the optical face while allowing light through the enclosure.
Power-Matched Enclosures: Each 150–500 W reference uses its own housing dimensions and mounting load.
Higher-Gauge 500 W Lead: The largest model increases the H05RN-F conductor section from 1.00 to 1.50 mm².

Power range	150 / 200 / 250 / 300 / 400 / 500 W
Protection	IP65
Efficienza luminosa	90–120 lm/W

Temperatura di colore	3000–6500 K
Fascio / CRI	110° / Ra80
Rated lifetime	25,000 h

High-Output IP65 LED Flood Light product image

High-Output IP65 LED Flood Light in a realistic application

Technical Specifications

Model Specifications

Modello	Dimensions L×H×W	Potenza	Cable	Efficacy	CCT
XGYFL-XRHO-E150	320 × 230 × 30 mm	150 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRHO-E200	380 × 365 × 30 mm	200 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRHO-E250	380 × 340 × 45 mm	250 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRHO-E300	480 × 310 × 60 mm	300 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRHO-E400	500 × 375 × 60 mm	400 W	0.15 m H05RN-F3G 1.00 mm²	90–120 lm/W	3000–6500 K
XGYFL-XRHO-E500	605 × 480 × 77 mm	500 W	0.15 m H05RN-F3G 1.50 mm²	90–120 lm/W	3000–6500 K

Product Description

Product Details

Product Construction

Each rectangular flood head is carried by a rear yoke bracket that transfers the fixture load to the mounting surface and allows the light direction to be set before the fasteners are locked. The six models share the same broad-beam product architecture.

Selection & Installation Notes

Compare a single high-power head with a multi-fixture layout using target illuminance, uniformity, glare and spill-light limits. Verify the supporting structure, wind exposure, circuit capacity, protective device and maintenance access before fixing the mounting position. For lower-output alternatives and related housing sizes, compare our general LED flood lights.

Recommended Application

Applicazioni

Factory Yards: Provides broad fixed illumination across exterior production and circulation areas.
Loading Aprons: Lights large vehicle and material-handling zones from elevated mounting points.
Open Storage Areas: Supports perimeter and aisle lighting around outdoor storage compounds.
Sports Perimeters: Adds wide-area illumination around practice grounds and facility boundaries.

Rimani
in contatto

Descrivici le esigenze del tuo mercato e dei tuoi prodotti

Condividi il tuo mercato, l’interesse per il prodotto, l’applicazione o la quantità stimata. Il nostro team può aiutarti ad accelerare il passaggio dalla selezione del prodotto alla quotazione e alla discussione sui campioni.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

Should one 500 W flood light replace several smaller units?

Not automatically. Several lower-power fixtures may improve uniformity and reduce glare. Compare photometric layouts, mounting points, circuit load and maintenance access.

Come cambia il montaggio tra i sei modelli?

Housing dimensions and exposed area increase across the power range. Size the bracket, bolts and supporting structure for the selected model and local wind conditions.

Is the 110-degree beam intended for long-throw lighting?

No. Ha una distribuzione luminosa ampia. Verificare la copertura ad alta installazione, la dispersione luminosa e l'abbagliamento con la fotometria di progetto.

What changes on the 500 W supply lead?

The 500 W model uses a 1.50 mm² H05RN-F conductor section, while the 150–400 W models use 1.00 mm². Circuit design still depends on the complete installation.

What does IP65 require from the installation?

IP65 applies to the rated fixture assembly. The short cable, external junction and supply connection also require sealing and protection suitable for their exposure.

Quali certificazioni si applicano a questa serie?

CE, IECEE CB, RoHS and ErP marks apply to this series. Confirm the exact model and market scope in the order documentation.