Corpi per apparecchi stagni a tubo sostituibile
- Independent Lamp Servicing: A worn light source can be exchanged while retaining the installed enclosure.
- Output Planning Choice: One- and two-lamp versions let designers select the required source count.
- Installation Fit Options: Distinct enclosure footprints suit narrow and wider ceiling zones.
- Positive Cover Retention: Side fasteners secure the diffuser to the lower shell and allow repeatable access to the interior.
| Product Format | Housing only for replaceable G13 LED tubes |
|---|---|
| Serie / Configurazione dei tubi | TW, TL o TS / singolo o doppio |
| Available Lengths | Approximately 0.65 to 1.56 m across the series |
| Materiali dell'involucro | Base in HIPS, ABS o PC / copertura in PC o PS / clip in plastica o acciaio inox |
|---|---|
| Protezione / Ingresso cavo | IP65 configuration / PG9 or PG11 |
| Installazione / Cablaggio | Montaggio a plafone / cablaggio del tubo a una o due estremità |
Technical Specifications
Model Specifications
| Model No. | Series | Dimensions (L × W × H) | Rated Power | N. di tubi | Mount Distance | Clips |
|---|---|---|---|---|---|---|
| XGYT8TPTL-E218 | TL | 660 × 115 × 65 mm | 2 × 18 W | 2 | 250 mm | 6 |
| XGYT8TPTL-E236 | TL | 1237 × 115 × 65 mm | 2 × 36 W | 2 | 850 mm | 10 |
| XGYT8TPTL-E258 | TL | 1563 × 115 × 65 mm | 2 × 58 W | 2 | 1150 mm | 14 |
| XGYT8TPTW-E118 | TW | 650 × 72 × 57 mm | 1 × 18 W | 1 | 350 mm | 6 |
| XGYT8TPTW-E218 | TW | 650 × 110 × 57 mm | 2 × 18 W | 2 | 350 mm | 6 |
| XGYT8TPTW-E136 | TW | 1270 × 72 × 57 mm | 1 × 36 W | 1 | 880 mm | 12 |
| XGYT8TPTW-E236 | TW | 1270 × 110 × 57 mm | 2 × 36 W | 2 | 880 mm | 12 |
| XGYT8TPTS-E118 | TS | 660 × 70 × 61 mm | 1 × 18 W | 1 | 310 mm | 6 |
| XGYT8TPTS-E218 | TS | 660 × 107 × 61 mm | 2 × 18 W | 2 | 310 mm | 6 |
| XGYT8TPTS-E136 | TS | 1260 × 70 × 61 mm | 1 × 36 W | 1 | 910 mm | 10 |
| XGYT8TPTS-E236 | TS | 1260 × 107 × 61 mm | 2 × 36 W | 2 | 910 mm | 10 |
| XGYT8TPTS-E158 | TS | 1562 × 70 × 61 mm | 1 × 58 W | 1 | 1210 mm | 14 |
| XGYT8TPTS-E258 | TS | 1562 × 107 × 61 mm | 2 × 58 W | 2 | 1210 mm | 14 |
Rated power identifies the tube configuration listed for the housing. Confirm the LED tube electrical input and single- or double-ended wiring before production.
Product Description
Product Details
Product Construction
This housing-only family uses G13 lampholders at both ends without a metal gear tray. Depending on the selected series, the body is HIPS, ABS or PC, the cover is PC or PS, and the enclosure uses plastic or stainless-steel side clips, a rubber or silicone sealing ring, PG9 or PG11 cable entry and metallic mounting clamps.
Selection & Installation Notes
Select TW, TL or TS by the available mounting envelope, then match the exact model to the required length, one- or two-tube layout, rated tube configuration, mounting distance and clip count. The G13 LED tube is selected separately; its length, electrical input and single- or double-ended wiring must match the lampholders and internal wiring. Use the specified sealing ring, cable entry, clips and assembly method for the complete IP65 configuration.
Recommended Application
Applicazioni
- Workshops and Warehouses: Provide serviceable linear lighting above production aisles, storage areas and maintenance zones.
- Parking Garages: Use the surface-mounted housing along parking bays, ramps and underground access routes.
- Service Corridors: Install the enclosed linear housing in utility passages and building service areas.
- Harbors and Docks: Mount the sealed fixture housing on walls or ceilings around harbor and dock service zones.
in contatto
- No.5 Fenghuang Road Qianjiang Industrial Area Dingqiao Town Haining Zhejiang 314413 China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Descrivici le esigenze del tuo mercato e dei tuoi prodotti
Condividi il tuo mercato, l’interesse per il prodotto, l’applicazione o la quantità stimata. Il nostro team può aiutarti ad accelerare il passaggio dalla selezione del prodotto alla quotazione e alla discussione sui campioni.
Frequently Asked Questions?
Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.
