交換式チューブ対応トライプルーフ照明器具ハウジング
- Independent Lamp Servicing: A worn light source can be exchanged while retaining the installed enclosure.
- Output Planning Choice: One- and two-lamp versions let designers select the required source count.
- Installation Fit Options: Distinct enclosure footprints suit narrow and wider ceiling zones.
- Positive Cover Retention: Side fasteners secure the diffuser to the lower shell and allow repeatable access to the interior.
| Product Format | Housing only for replaceable G13 LED tubes |
|---|---|
| シリーズ / チューブ構成 | TW、TLまたはTS / 1灯または2灯 |
| Available Lengths | Approximately 0.65 to 1.56 m across the series |
| 筐体材料 | HIPS、ABSまたはPCベース / PCまたはPSカバー / 樹脂製またはステンレス製クリップ |
|---|---|
| 保護 / ケーブル引込口 | IP65 configuration / PG9 or PG11 |
| 取付方法 / 配線 | 直付け / 片側給電または両側給電のチューブ配線 |
Technical Specifications
Model Specifications
| Model No. | Series | Dimensions (L × W × H) | Rated Power | チューブ本数 | Mount Distance | Clips |
|---|---|---|---|---|---|---|
| XGYT8TPTL-E218 | TL | 660 × 115 × 65 mm | 2 × 18 W | 2 | 250 mm | 6 |
| XGYT8TPTL-E236 | TL | 1237 × 115 × 65 mm | 2 × 36 W | 2 | 850 mm | 10 |
| XGYT8TPTL-E258 | TL | 1563 × 115 × 65 mm | 2 × 58 W | 2 | 1150 mm | 14 |
| XGYT8TPTW-E118 | TW | 650 × 72 × 57 mm | 1 × 18 W | 1 | 350 mm | 6 |
| XGYT8TPTW-E218 | TW | 650 × 110 × 57 mm | 2 × 18 W | 2 | 350 mm | 6 |
| XGYT8TPTW-E136 | TW | 1270 × 72 × 57 mm | 1 × 36 W | 1 | 880 mm | 12 |
| XGYT8TPTW-E236 | TW | 1270 × 110 × 57 mm | 2 × 36 W | 2 | 880 mm | 12 |
| XGYT8TPTS-E118 | TS | 660 × 70 × 61 mm | 1 × 18 W | 1 | 310 mm | 6 |
| XGYT8TPTS-E218 | TS | 660 × 107 × 61 mm | 2 × 18 W | 2 | 310 mm | 6 |
| XGYT8TPTS-E136 | TS | 1260 × 70 × 61 mm | 1 × 36 W | 1 | 910 mm | 10 |
| XGYT8TPTS-E236 | TS | 1260 × 107 × 61 mm | 2 × 36 W | 2 | 910 mm | 10 |
| XGYT8TPTS-E158 | TS | 1562 × 70 × 61 mm | 1 × 58 W | 1 | 1210 mm | 14 |
| XGYT8TPTS-E258 | TS | 1562 × 107 × 61 mm | 2 × 58 W | 2 | 1210 mm | 14 |
Rated power identifies the tube configuration listed for the housing. Confirm the LED tube electrical input and single- or double-ended wiring before production.
Product Description
Product Details
Product Construction
This housing-only family uses G13 lampholders at both ends without a metal gear tray. Depending on the selected series, the body is HIPS, ABS or PC, the cover is PC or PS, and the enclosure uses plastic or stainless-steel side clips, a rubber or silicone sealing ring, PG9 or PG11 cable entry and metallic mounting clamps.
Selection & Installation Notes
Select TW, TL or TS by the available mounting envelope, then match the exact model to the required length, one- or two-tube layout, rated tube configuration, mounting distance and clip count. The G13 LED tube is selected separately; its length, electrical input and single- or double-ended wiring must match the lampholders and internal wiring. Use the specified sealing ring, cable entry, clips and assembly method for the complete IP65 configuration.
Recommended Application
用途
- Workshops and Warehouses: Provide serviceable linear lighting above production aisles, storage areas and maintenance zones.
- Parking Garages: Use the surface-mounted housing along parking bays, ramps and underground access routes.
- Service Corridors: Install the enclosed linear housing in utility passages and building service areas.
- Harbors and Docks: Mount the sealed fixture housing on walls or ceilings around harbor and dock service zones.
Frequently Asked Questions?
Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.
