交換式チューブ対応トライプルーフ照明器具ハウジング
- Independent Lamp Servicing: 設置済みのエンクロージャを維持したまま、消耗した光源を交換できます。
- Output Planning Choice: One- and two-lamp versions let designers select the required source count.
- Installation Fit Options: Distinct enclosure footprints suit narrow and wider ceiling zones.
- Positive Cover Retention: 側面ファスナーによりディフューザーを下部シェルに固定し、内部へ繰り返しアクセスできます。
| Product Format | Housing only for replaceable G13 LED tubes |
|---|---|
| シリーズ / チューブ構成 | TW、TLまたはTS / 1灯または2灯 |
| Available Lengths | Approximately 0.65 to 1.56 m across the series |
| 筐体材料 | HIPS、ABSまたはPCベース / PCまたはPSカバー / 樹脂製またはステンレス製クリップ |
|---|---|
| 保護 / ケーブル引込口 | IP65 configuration / PG9 or PG11 |
| 取付方法 / 配線 | 直付け / 片側給電または両側給電のチューブ配線 |
Technical Specifications
Model Specifications
| Model No. | Series | Dimensions (L × W × H) | Rated Power | チューブ本数 | Mount Distance | Clips |
|---|---|---|---|---|---|---|
| XGYT8TPTL-E218 | TL | 660 × 115 × 65 mm | 2 × 18 W | 2 | 250 mm | 6 |
| XGYT8TPTL-E236 | TL | 1237 × 115 × 65 mm | 2 × 36 W | 2 | 850 mm | 10 |
| XGYT8TPTL-E258 | TL | 1563 × 115 × 65 mm | 2 × 58 W | 2 | 1150 mm | 14 |
| XGYT8TPTW-E118 | TW | 650 × 72 × 57 mm | 1 × 18 W | 1 | 350 mm | 6 |
| XGYT8TPTW-E218 | TW | 650 × 110 × 57 mm | 2 × 18 W | 2 | 350 mm | 6 |
| XGYT8TPTW-E136 | TW | 1270 × 72 × 57 mm | 1 × 36 W | 1 | 880 mm | 12 |
| XGYT8TPTW-E236 | TW | 1270 × 110 × 57 mm | 2 × 36 W | 2 | 880 mm | 12 |
| XGYT8TPTS-E118 | TS | 660 × 70 × 61 mm | 1 × 18 W | 1 | 310 mm | 6 |
| XGYT8TPTS-E218 | TS | 660 × 107 × 61 mm | 2 × 18 W | 2 | 310 mm | 6 |
| XGYT8TPTS-E136 | TS | 1260 × 70 × 61 mm | 1 × 36 W | 1 | 910 mm | 10 |
| XGYT8TPTS-E236 | TS | 1260 × 107 × 61 mm | 2 × 36 W | 2 | 910 mm | 10 |
| XGYT8TPTS-E158 | TS | 1562 × 70 × 61 mm | 1 × 58 W | 1 | 1210 mm | 14 |
| XGYT8TPTS-E258 | TS | 1562 × 107 × 61 mm | 2 × 58 W | 2 | 1210 mm | 14 |
Rated power identifies the tube configuration listed for the housing. Confirm the LED tube electrical input and single- or double-ended wiring before production.
Product Description
Product Details
Product Construction
This housing-only family uses G13 lampholders at both ends without a metal gear tray. Depending on the selected series, the body is HIPS, ABS or PC, the cover is PC or PS, and the enclosure uses plastic or stainless-steel side clips, a rubber or silicone sealing ring, PG9 or PG11 cable entry and metallic mounting clamps.
Selection & Installation Notes
Select TW, TL or TS by the available mounting envelope, then match the exact model to the required length, one- or two-tube layout, rated tube configuration, mounting distance and clip count. The G13 LED tube is selected separately; its length, electrical input and single- or double-ended wiring must match the lampholders and internal wiring. Use the specified sealing ring, cable entry, clips and assembly method for the complete IP65 configuration.
Recommended Application
用途
- Workshops and Warehouses: Provide serviceable linear lighting above production aisles, storage areas and maintenance zones.
- Parking Garages: Use the surface-mounted housing along parking bays, ramps and underground access routes.
- Service Corridors: Install the enclosed linear housing in utility passages and building service areas.
- Harbors and Docks: Mount the sealed fixture housing on walls or ceilings around harbor and dock service zones.
Frequently Asked Questions?
製品仕様、モデル選定、用途、見積要件に関するよくある質問への明確な回答をご確認ください。プロジェクト固有の要件については、対象市場、必要数量、主要仕様をお送りください。
