XGYSWL-LTRP-E0.15 IP54 ソーラーウォールライト
- Mains-Free Placement: Integrated solar charging supports wall locations without a wired power feed.
- Orientation Lighting: The 30 lm output provides low-level guidance around entrances and paths.
- Automatic Activation: The IR sensor supports responsive operation along the intended approach route.
- Compact Wall Profile: The enclosure requires enough mounting area for its overall dimensions.
| Dimensions | 70×60×100 mm |
|---|---|
| 定格電力/出力 | 0.15 W / 30 lm |
| Solar Panel | 5.5 V / 0.7 W 単結晶 |
| バッテリー | 18650 1200 mAh |
|---|---|
| 本体 / 保護等級 | SPCC鉄 + PC / IP54 |
| センサー / 制御 | IRセンサー |
Technical Specifications
Model Specifications
| Model No. | Dimensions | Rated Power | 出力 | Solar Panel | バッテリー | Protection |
|---|---|---|---|---|---|---|
| XGYSWL-LTRP-E0.15 | 70×60×100 mm | 0.15 W | 30 lm | 5.5 V / 0.7 W | 18650 1200 mAh | IP54 |
Product Description
Product Details
Product Construction
XGYSWL-LTRP-E0.15は、70 × 60 × 100 mmのSPCC鋼板およびPC製エンクロージャ内に、単結晶太陽電池パネル、18650バッテリー、LEDライトおよびIRセンサーを一体化しています。
Selection & Installation Notes
パネルは遮るもののない日光を受ける位置に設置し、センサーは想定する接近経路に向けてください。最終固定前に、壁面強度、排水、および必要な夜間動作モードを確認してください。IP54等級は屋外暴露の範囲を定義します。当社の関連製品を比較する solar wall lights range.
Recommended Application
用途
- Residential Entrances: Sensor control provides low-level guidance at sun-exposed exterior doorways.
- Garden Side Passages: The 30 lm output supports orientation along paths beside homes and small buildings.
- Boundary Walls: Solar charging serves wall positions where a mains cable is unavailable.
- Outdoor Utility Areas: The compact enclosure suits protected service locations with clear daylight exposure.
Frequently Asked Questions?
製品仕様、モデル選定、用途、見積要件に関するよくある質問への明確な回答をご確認ください。プロジェクト固有の要件については、対象市場、必要数量、主要仕様をお送りください。
パネルは遮るもののない日光を受ける位置に設置してください。日陰、冬季の太陽高度、パネルの汚れは利用可能な充電エネルギーを低下させます。
Operating time depends on the daily solar charge, battery condition, ambient temperature and selected sensor mode. Verify the required night profile at the installation site.
Aim the IR sensor toward the expected approach path and away from moving plants, traffic or heat sources that could cause unwanted activation.
IP54等級です。取付位置をこの等級に適合させ、製品を噴流水や浸水から遠ざけてください。
Check wall strength, panel sun exposure, sensor direction, drainage and the required night operating mode before final fixing.
We can configure supported housing finish, CCT, sensing sequence, labels and packaging after the electrical and environmental sample is approved.




