New Lights

植物育成用蛍光ランプ

Plant growing fluorescent lamps are replaceable linear light sources for compatible indoor horticultural test fixtures and growing-rack equipment. Select each lamp against the equipment drawing and approved project specification.
  • Continuous Housing Layout: The elongated form follows narrow overhead channels used within linear equipment layouts.
  • Maintenance-Friendly Renewal: A spent illumination element can be exchanged without discarding the surrounding enclosure.
  • Order-Code Traceability: The full reference distinguishes outwardly similar variants during service.
  • Repeat Installation Consistency: An approved definition can be carried across matching equipment.
Product typeplant growing fluorescent lamp
Tube formatsT5 and T8
定格電力8-40 W
DimensionsΦ16/Φ26 × 288-1449 mm
Cap optionsG5 and G13; match the selected tube configuration
Catalogued spectrum600-700 nm
Supply boundaryLamp only; compatible holder, fixture and operating gear are separate

Technical Specifications

Model Specifications

モデルTubeDimensions消費電力電源スペクトルCap
XGYT5-8W-PGT5Φ16 × 288 mm8 W110/220 V600-700 nmG5
XGYT5-14W-PGT5Φ16 × 549 mm14 W110/220 V600-700 nmG5
XGYT5-21W-PGT5Φ16 × 849 mm21 W110/220 V600-700 nmG5
XGYT5-28W-PGT5Φ16 × 1149 mm28 W110/220 V600-700 nmG13
XGYT5-35W-PGT5Φ16 × 1449 mm35 W110/220 V600-700 nmG5
XGYT8-18W-AQT8Φ26 × 590 mm18 W110/220 V600-700 nmG13
XGYT8-30W-AQT8Φ26 × 895 mm30 W110/220 V600-700 nmG13
XGYT8-40W-PGT8Φ26 × 1199 mm40 W110/220 V600-700 nmG13

Values reproduce the 2017 New Lights catalogue table. The two T8 references ending in -AQ on the plant-growing page are retained exactly as printed and require order-level identity confirmation.

Product Description

Product Details

Product Construction

A sealed glass cylinder contains electrode assemblies. Contact pins project from metal end pieces.

Selection & Installation Notes

Confirm the catalogue code against the drawing. Check pin spacing, cavity clearance and circuit requirements before approving a sample. Compare related options in our professional grow light range.

Recommended Application

用途

  • Horticultural Test Fixtures: Install the selected lamp in a compatible enclosed horticultural test fixture.
  • Controlled-Environment Fixtures: Use matched replacement lamps in suitable indoor controlled-environment luminaires.
  • Maintenance Relamping: Match the complete reference and fixture configuration when replacing an existing lamp.
  • OEM Horticultural Equipment: Integrate the approved lamp specification into compatible horticultural lighting equipment.
つながりを
保つ

市場と製品のニーズをお聞かせください

市場、関心のある製品、用途、または予定数量をお知らせください。当社チームが、製品選定から見積り・サンプル相談までをより迅速に進められるよう支援します。

Frequently Asked Questions?

製品仕様、モデル選定、用途、見積要件に関するよくある質問への明確な回答をご確認ください。プロジェクト固有の要件については、対象市場、必要数量、主要仕様をお送りください。

What is a plant growing fluorescent lamp?

It is a replaceable linear light source designed for use inside a compatible horticultural test fixture or display luminaire.

Can similar-looking plant-growing lamps be interchanged?

Do not assume interchangeability. Match the complete reference, physical fit, holder arrangement and operating gear to the existing equipment.

器具と制御装置は含まれていますか?

いいえ。本製品は交換用ランプです。キャノピーまたは器具、ホルダーおよび動作装置は別部品です。

How should a replacement lamp be selected?

機器図面および承認済みランプ仕様を使用し、設置前に完全な参照品番と実物サンプルを確認してください。

Does the product name establish a plant-growth result?

製品名だけから、特定の発芽、バイオマス、開花、その他の植物成果を想定すべきではありません。これらの要件は機器およびプロジェクトレベルで定義・検証してください。

この製品名は、ランプがUVを放射することを意味しますか?

No. Plant-growing use does not by itself establish UV output. Any spectral or UV requirement must be stated and verified in the approved technical specification.

Featured Products

Scroll to Top

Send Us a Message

連絡先情報とメッセージをご入力ください。当社チームがメールまたはご希望の連絡方法で返信します。

照明プロジェクトについてお聞かせください

製品、用途、購買要件をご共有ください。当社の照明チームが、適した選択肢とプロジェクト支援についてご返信します。