Fluorescentielampen voor plantenkweek
- Continuous Housing Layout: The elongated form follows narrow overhead channels used within linear equipment layouts.
- Maintenance-Friendly Renewal: A spent illumination element can be exchanged without discarding the surrounding enclosure.
- Order-Code Traceability: The full reference distinguishes outwardly similar variants during service.
- Repeat Installation Consistency: An approved definition can be carried across matching equipment.
| Product type | plant growing fluorescent lamp |
|---|---|
| Tube formats | T5 and T8 |
| Nominaal vermogen | 8-40 W |
| Dimensions | Φ16/Φ26 × 288-1449 mm |
| Cap options | G5 and G13; match the selected tube configuration |
|---|---|
| Catalogued spectrum | 600-700 nm |
| Supply boundary | Lamp only; compatible holder, fixture and operating gear are separate |
Technical Specifications
Model Specifications
| Model | Tube | Dimensions | Vermogen | Voeding | Spectrum | Cap |
|---|---|---|---|---|---|---|
| XGYT5-8W-PG | T5 | Φ16 × 288 mm | 8 W | 110/220 V | 600-700 nm | G5 |
| XGYT5-14W-PG | T5 | Φ16 × 549 mm | 14 W | 110/220 V | 600-700 nm | G5 |
| XGYT5-21W-PG | T5 | Φ16 × 849 mm | 21 W | 110/220 V | 600-700 nm | G5 |
| XGYT5-28W-PG | T5 | Φ16 × 1149 mm | 28 W | 110/220 V | 600-700 nm | G13 |
| XGYT5-35W-PG | T5 | Φ16 × 1449 mm | 35 W | 110/220 V | 600-700 nm | G5 |
| XGYT8-18W-AQ | T8 | Φ26 × 590 mm | 18 W | 110/220 V | 600-700 nm | G13 |
| XGYT8-30W-AQ | T8 | Φ26 × 895 mm | 30 W | 110/220 V | 600-700 nm | G13 |
| XGYT8-40W-PG | T8 | Φ26 × 1199 mm | 40 W | 110/220 V | 600-700 nm | G13 |
Values reproduce the 2017 New Lights catalogue table. The two T8 references ending in -AQ on the plant-growing page are retained exactly as printed and require order-level identity confirmation.
Product Description
Product Details
Product Construction
A sealed glass cylinder contains electrode assemblies. Contact pins project from metal end pieces.
Selection & Installation Notes
Confirm the catalogue code against the drawing. Check pin spacing, cavity clearance and circuit requirements before approving a sample. Compare related options in our professional grow light range.
Recommended Application
Toepassingen
- Horticultural Test Fixtures: Install the selected lamp in a compatible enclosed horticultural test fixture.
- Controlled-Environment Fixtures: Use matched replacement lamps in suitable indoor controlled-environment luminaires.
- Maintenance Relamping: Match the complete reference and fixture configuration when replacing an existing lamp.
- OEM Horticultural Equipment: Integrate the approved lamp specification into compatible horticultural lighting equipment.
in contact
- No.5 Fenghuang Road Qianjiang Industrial Area Dingqiao Town Haining Zhejiang 314413 China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Frequently Asked Questions?
Vind duidelijke antwoorden op veelgestelde vragen over productspecificaties, modelselectie, toepassingen en offertevereisten. Stuur ons voor projectspecifieke behoeften uw doelmarkt, vereiste hoeveelheid en belangrijkste specificaties.
It is a replaceable linear light source designed for use inside a compatible horticultural test fixture or display luminaire.
Do not assume interchangeability. Match the complete reference, physical fit, holder arrangement and operating gear to the existing equipment.
Nee. Het product is de vervangbare lamp; de kap of armatuur, houders en bedrijfsapparatuur zijn afzonderlijke componenten.
Gebruik de apparatuurtekening en de goedgekeurde lampspecificatie en controleer vervolgens vóór installatie de volledige referentie en het fysieke monster.
Er mag geen specifiek resultaat voor kieming, biomassa, bloei of andere plantresultaten worden aangenomen op basis van alleen de productnaam. Definieer en verifieer deze vereisten op apparatuur- en projectniveau.
No. Plant-growing use does not by itself establish UV output. Any spectral or UV requirement must be stated and verified in the approved technical specification.











