デュアルヘッド LED 投光器用三脚
- Independent Head Aiming: Direct each beam toward a separate part of the task area.
- Raised Dual-Head Layout: The shared crossbar and folding tripod lift both heads above low equipment.
- Power Options: Listed head models cover 30, 50, 60 and 100 W choices.
- IP65 Light Heads: 記載の保護等級は灯具ヘッドに適用されます。接続部および電源供給点には、現場に応じた別途の保護が必要です。
| Rated Power | 30 / 50 / 60 / 100 W |
|---|---|
| Protection | IP65 light heads |
| Efficacy | 90–120 lm/W |
|---|---|
| CCT / Cable | 3000–6500 K / 1.5 m H05RN-F |
Technical Specifications
Model Specifications
| Model No. | Dimensions | 消費電力 | Efficacy | CCT | Cable |
|---|---|---|---|---|---|
| XGYFL-TRIPOD-E30 | 162 × 185 × 52 | 30W | 90-120 lm/W | 3000K-6500K | 1.5m H05RN-F3G1.0mm² + VDE plug |
| XGYFL-TRIPOD-E50 | 240 × 245 × 56 | 50W | 90-120 lm/W | 3000K-6500K | 1.5m H05RN-F3G1.0mm² + VDE plug |
| XGYFL-TRIPOD-E60 | 220 × 223 × 55 | 60W | 90-120 lm/W | 3000K-6500K | 1.5m H05RN-F3G1.0mm² + VDE plug |
| XGYFL-TRIPOD-E100 | 240 × 245 × 56 | 100W | 90-120 lm/W | 3000K-6500K | 1.5m H05RN-F3G1.0mm² + VDE plug |
Product Description
Product Details
Product Construction
Two independently adjustable flood heads share a raised crossbar and folding tripod. The elevated layout helps spread light across adjacent task areas and reduces obstruction shadows from low equipment.
Selection & Installation Notes
必要な作業距離、照射範囲、グレア制御に合わせて、ヘッドの出力と寸法を選定してください。使用前に、入力電圧、総接続負荷、ケーブル経路、プラグの露出、三脚の安定性を確認してください。その他のキャリーフレームおよび床置き形式については、当社の portable work lights.
Recommended Application
用途
- Interior Fit-outs: aim the heads apart for even coverage rather than one bright center.
- Night Construction: place the tripod outside material-handling paths.
- Maintenance Shutdowns: raise light above equipment while keeping isolation accessible.
- Outdoor Temporary Work: add approved stabilization where wind or impact is possible.
Frequently Asked Questions?
製品仕様、モデル選定、用途、見積要件に関するよくある質問への明確な回答をご確認ください。プロジェクト固有の要件については、対象市場、必要数量、主要仕様をお送りください。
The listed wattage is associated with each flood-head model; the assembled two-head system total is not stated. Confirm the total connected load and approved electrical configuration before ordering.
Aim them to cover separate parts of the work zone, then check overlap, edge darkness and direct glare. A photometric or measured site check is more reliable than pointing both heads at one center.
Fully spread the legs on level ground, lock the mast and keep the stand outside impact routes. Wind or public access may require additional stabilization.
いいえ。記載の保護等級は灯具ヘッドに適用されます。ケーブル接続部、VDEプラグ、延長部、電源供給点には、現場に適した保護が必要です。
Do not assume they are interchangeable. Confirm the approved two-head electrical drawing, crossbar load, circuit demand and sample configuration for the requested combination.
完全な機械・電気サンプルの承認後、対応するヘッドの組み合わせ、スタンド、入力、CCT、ケーブルおよびプラグ、ラベル、梱包を構成できます。






