Is the UGR < 19 option standard on every model?

It is listed as an option. Specify it in the order and verify the complete room layout because final glare depends on more than the luminaire.

Slank LED paneel met zijwaartse lichtemissie

Q: How does a side-emission panel differ from a backlit panel?

Its LEDs feed light into a guide plate from the edges, allowing a 9 mm optical body. A backlit panel places LEDs behind the diffuser and usually has a deeper housing.

Q: Where is the driver installed if the panel is only 9 mm deep?

The driver is separate from the optical body. Confirm accessible ceiling space, cable routing and driver mounting before installation.

Q: Which model fits a 625 mm ceiling grid?

Use the 620 × 620 mm model for the corresponding metric module, but verify the actual tee spacing and support method.

Q: Is the UGR < 19 option standard on every model?

It is listed as an option. Specify it in the order and verify the complete room layout because final glare depends on more than the luminaire.

Q: Why does the 595 × 1195 mm model reach 72 W?

The 595 × 1195 mm format has a listed 50–72 W range, while the other sizes list 24–60 W. The final driver and output must be fixed for the ordered model.

Q: What OEM/ODM choices are available?

We can configure the selected housing size, power, efficacy target, CCT, CRI, driver, glare option, labels and packaging after sample approval.

This 9 mm side-emission LED panel guides light from the frame across a flat optical plate, producing a slim profile in four metric ceiling formats. We manufacture the series for OEM/ODM commercial projects, with the panel size, rated power, efficacy target, CCT, driver and optional glare requirement confirmed before sampling.

9 mm Side-Emission Body: Edge-fed light distribution keeps the optical panel shallow.
Four Metric Formats: Square and rectangular sizes cover several common ceiling-grid layouts.
Separate Driver Arrangement: De driver blijft buiten de slanke optische behuizing voor installatie in de plafondspouw.
Optional Glare Configuration: Een optie met lage verblinding kan worden gespecificeerd voor interieurs met beeldschermen en taakgerichte werkzaamheden.

Constructie	Zijlichtgevend lichtgeleiderpaneel
Behuizingsdiepte	9 mm
Panel formats	595×595 / 620×620 / 295×1195 / 595×1195 mm
Nominaal vermogen	24–60 W / 50–72 W

Lichtrendement	80–160 lm/W
CCT	3000–6500 K
Rated life	50,000 h

LED side-emission panels installed in an office corridor

Technical Specifications

Model Specifications

Model No.	Dimensions (mm)	Rated Power	Efficacy	CCT	Housing Depth
XGYPL-SE-6060-E40	595×595×9	24–60 W	80–160 lm/W	3000–6500 K	9 mm
XGYPL-SE-6262-E40	620×620×9	24–60 W	80–160 lm/W	3000–6500 K	9 mm
XGYPL-SE-30120-E40	295×1195×9	24–60 W	80–160 lm/W	3000–6500 K	9 mm
XGYPL-SE-60120-E60	595×1195×9	50–72 W	80–160 lm/W	3000–6500 K	9 mm

Product Description

Product Details

Product Construction

The side-emission assembly guides light from the perimeter through a flat optical plate inside a 9 mm panel body. A separate driver sits outside the optical body, while four square and rectangular formats share the same slim ceiling profile.

Selection & Installation Notes

Choose the exact panel format for the measured ceiling grid, then confirm support, cable routing and accessible space for the separate driver. Specify the ordered power, efficacy target, CCT, CRI, driver and optional glare configuration before sampling. Treat the listed power values as order options unless a field-selectable driver is specifically approved. For related low-glare and sensor-ready formats, compare our project-grade LED panels.

Recommended Application

Toepassingen

Offices and Meeting Rooms: Gebruik slanke plafondpanelen voor werkplekken, vergaderruimten en presentatieruimten.
Corridors and Reception Areas: De optische behuizing van 9 mm is geschikt voor binnenzones voor doorstroming en ontvangst met ondiepe plafondafwerkingen.
Schools and Libraries: Vierkante en lineaire formaten ondersteunen klaslokalen, studieruimten en circulatiezones.
Replacement Ceiling Grids: Four metric formats cover common square and rectangular module layouts.

Blijf
in contact

Vertel ons over uw markt- en productbehoeften

Deel uw markt, productinteresse, toepassing of geschatte hoeveelheid. Ons team kan u helpen sneller van productselectie naar offerte en bespreking van monsters te gaan.

Frequently Asked Questions?

Vind duidelijke antwoorden op veelgestelde vragen over productspecificaties, modelselectie, toepassingen en offertevereisten. Stuur ons voor projectspecifieke behoeften uw doelmarkt, vereiste hoeveelheid en belangrijkste specificaties.

Waarin verschilt een zijlichtgevend paneel van een backlit paneel?

Its LEDs feed light into a guide plate from the edges, allowing a 9 mm optical body. A backlit panel places LEDs behind the diffuser and usually has a deeper housing.

Where is the driver installed if the panel is only 9 mm deep?

The driver is separate from the optical body. Confirm accessible ceiling space, cable routing and driver mounting before installation.

Which model fits a 625 mm ceiling grid?

Gebruik het model van 620 × 620 mm voor de overeenkomstige metrische module, maar controleer de werkelijke T-profielafstand en ondersteuningsmethode.

Is de optie UGR < 19 standaard op elk model?

Dit staat vermeld als optie. Specificeer dit in de bestelling en controleer de volledige ruimte-indeling, omdat de uiteindelijke verblinding van meer afhangt dan alleen de armatuur.

Why does the 595 × 1195 mm model reach 72 W?

Het formaat 595 × 1195 mm heeft een vermeld bereik van 50–72 W, terwijl de andere maten 24–60 W vermelden. De definitieve driver en lichtopbrengst moeten voor het bestelde model worden vastgelegd.

What OEM/ODM choices are available?

We can configure the selected housing size, power, efficacy target, CCT, CRI, driver, glare option, labels and packaging after sample approval.