Does shatter-retention film make the glass tube unbreakable?

No. The glass can still break. The adhesive-backed PET film is intended to hold fragments inside the wrap after breakage.

Which lengths and power levels are available?

The listed range covers 590, 895, 1199 and 1500 mm tubes with discrete 8-24 W ratings.

How is the magnetic-ballast retrofit configured?

The documented route keeps the magnetic ballast and replaces the fluorescent starter with the specified LED bridge. Electronic-ballast compatibility is not stated.

Which film finishes are available?

Available finishes include single-color frosted PET film and double-color frosted film with an opal rear section.

T8 splintervrije glazen LED-buis met folie

This G13 T8 LED tube uses adhesive PET film over its glass body to retain fragments after breakage, with 590-1500 mm and 8-24 W models. It is designed for indoor linear lighting in food handling, storage, retail and other facilities where fragment retention is required.

Bonded PET Fragment Retention: Adhesive-backed PET film holds broken glass pieces inside the outer wrap instead of leaving the glass body exposed.
Wide Tubular Distribution: A 320-degree beam supports broad linear illumination from compatible T8 fixtures.
Selectable Diffusion Finish: Single-color frosted and double-color frosted options with an opal rear section provide distinct diffusion choices.
Defined Service Rating: The series lists a 25,000-hour rated lifetime with a two-year warranty.

Dimensions	Dia. 26 x L 590 / 895 / 1199 / 1500 mm
Vermogen / Vervanging	8-24 W / 18-58 W fluorescent equivalent
Efficacy	100-160 lm/W
Ingang / vermogensfactor	S: AC 180-265 V; U: AC 85-265 V / PF 0.5 or 0.9

CCT / CRI	3000-6500 K / CRI 80 / 90 / 95 / 97
Lamp Base	G13
Ingangsroutes	Single-ended, double-ended or magnetic-ballast retrofit

Complete T8 shatterproof film glass LED tube with white G13 bi-pin end caps

Linear T8 lighting installed above a commercial food preparation and packaging room

XGYT8B502, Dia. 26 x L 590 mm, 8 / 9 / 10 W, PET-film-wrapped glass T8 tube

XGYT8B503, Dia. 26 x L 895 mm, 12 W, PET-film-wrapped glass T8 tube

XGYT8B504, Dia. 26 x L 1199 mm, 18 / 20 W, PET-film-wrapped glass T8 tube

XGYT8B505, Dia. 26 x L 1500 mm, 22 / 24 W, PET-film-wrapped glass T8 tube

Technical Specifications

Model Specifications

Model No.	Dimensions D x L (mm)	Rated Power	Vermogensequivalent	Efficacy	CCT / CRI	Input / PF	Body
XGYT8B502	26 x 590	8 W	18 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B502	26 x 590	9 W	18 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B502	26 x 590	10 W	18 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B503	26 x 895	12 W	30 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B504	26 x 1199	18 W	36 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B504	26 x 1199	20 W	36 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B505	26 x 1500	22 W	58 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass
XGYT8B505	26 x 1500	24 W	58 W	100-160 lm/W	3000-6500 K / 80-97	S: 180-265 V; U: 85-265 V / PF 0.5 or 0.9	PET-film glass

All listed rows use G13 pins, SMD2835 LEDs and a 320-degree beam. The series lists a 25,000-hour rated lifetime and a two-year warranty. Confirm the ordered film finish and input route.

Product Description

Product Details

Product Construction

The 26 mm tube combines an SMD2835 linear LED assembly with a clear glass body wrapped in adhesive-backed PET film. If the glass breaks, the inner adhesive helps keep fragments inside the film. The visible reference construction uses white fire-resistant PC end caps with G13 pins. Shatter-retention film reduces fragment release; it does not make the glass unbreakable.

Selection & Installation Notes

Select the exact length, rated power, S or U voltage version, power factor, film finish and input route before ordering. Follow only the wiring diagram supplied with that version: use the ordered single-ended or double-ended direct-input arrangement, or replace the fluorescent starter with the specified LED bridge for the magnetic-ballast route. Electronic-ballast compatibility is not stated. De-energize and replace the complete lamp if the glass or film is damaged.

Recommended Application

Toepassingen

Food Preparation Areas: Voorzie keukens en verwerkingsruimten met een gedocumenteerd glascontroleprogramma van lineaire sfeerverlichting.
Food Storage Facilities: Illuminate dry indoor stock, cold-storage support and packaging areas where fragment retention is required.
Retail and Display Areas: Gebruik compatibele T8-armaturen voor verlichting van gangpaden, schappen en algemene presentaties.
Warehouses and Workshops: Provide broad linear lighting in dry indoor storage and production spaces.

Blijf
in contact

Vertel ons over uw markt- en productbehoeften

Deel uw markt, productinteresse, toepassing of geschatte hoeveelheid. Ons team kan u helpen sneller van productselectie naar offerte en bespreking van monsters te gaan.

Frequently Asked Questions?

Vind duidelijke antwoorden op veelgestelde vragen over productspecificaties, modelselectie, toepassingen en offertevereisten. Stuur ons voor projectspecifieke behoeften uw doelmarkt, vereiste hoeveelheid en belangrijkste specificaties.

Maakt splintervasthoudende folie de glazen buis onbreekbaar?

Nee. Het glas kan nog steeds breken. De zelfklevende PET-folie is bedoeld om fragmenten na breuk binnen de omwikkeling te houden.

Welke lengtes en vermogensniveaus zijn beschikbaar?

Het vermelde assortiment omvat buizen van 590, 895, 1199 en 1500 mm met afzonderlijke vermogens van 8-24 W.

Kan de buis enkelzijdig of dubbelzijdig worden gevoed?

The series lists both input routes. Install only the exact arrangement supplied for the ordered electrical version.

Hoe wordt de retrofit met magnetisch voorschakelapparaat geconfigureerd?

De gedocumenteerde oplossing behoudt het magnetische voorschakelapparaat en vervangt de fluorescentiestarter door de gespecificeerde LED-brug. Compatibiliteit met elektronische voorschakelapparaten wordt niet vermeld.

Welke folieafwerkingen zijn beschikbaar?

Beschikbare afwerkingen omvatten matte PET-folie in één kleur en matte folie in twee kleuren met een opaal achtergedeelte.

Wat moet er gebeuren als de folie of het glas beschadigd is?

De-energize the fixture, follow the site broken-lamp procedure and replace the complete tube. Do not continue using a lamp with damaged glass or film.