Plant Growing Fluorescent Lamps

Plant growing fluorescent lamps are replaceable linear light sources for compatible indoor horticultural test fixtures and growing-rack equipment. Select each lamp against the equipment drawing and approved project specification.

Continuous Housing Layout: The elongated form follows narrow overhead channels used within linear equipment layouts.
Maintenance-Friendly Renewal: A spent illumination element can be exchanged without discarding the surrounding enclosure.
Order-Code Traceability: The full reference distinguishes outwardly similar variants during service.
Repeat Installation Consistency: An approved definition can be carried across matching equipment.

Product type	plant growing fluorescent lamp
Tube formats	T5 and T8
Rated power	8-40 W
Dimensions	Φ16/Φ26 × 288-1449 mm

Cap options	G5 and G13; match the selected tube configuration
Catalogued spectrum	600-700 nm
Supply boundary	Lamp only; compatible holder, fixture and operating gear are separate

Clean T5 G5 plant growing fluorescent lamp for XGYT5-8W-PG

Linear fluorescent tubes installed in supported fixtures above leafy seedlings on an indoor growing rack

Clean T5 G5 plant growing fluorescent lamp for XGYT5-14W-PG

Clean T5 G5 plant growing fluorescent lamp for XGYT5-21W-PG

Clean T5 G13 plant growing fluorescent lamp for XGYT5-28W-PG

Clean T5 G5 plant growing fluorescent lamp for XGYT5-35W-PG

Clean T8 G13 plant growing fluorescent lamp for XGYT8-18W-AQ

Clean T8 G13 plant growing fluorescent lamp for XGYT8-30W-AQ

Clean T8 G13 plant growing fluorescent lamp for XGYT8-40W-PG

Technical Specifications

Model Specifications

Model	Tube	Dimensions	Power	Supply	Spectrum	Cap
XGYT5-8W-PG	T5	Φ16 × 288 mm	8 W	110/220 V	600-700 nm	G5
XGYT5-14W-PG	T5	Φ16 × 549 mm	14 W	110/220 V	600-700 nm	G5
XGYT5-21W-PG	T5	Φ16 × 849 mm	21 W	110/220 V	600-700 nm	G5
XGYT5-28W-PG	T5	Φ16 × 1149 mm	28 W	110/220 V	600-700 nm	G13
XGYT5-35W-PG	T5	Φ16 × 1449 mm	35 W	110/220 V	600-700 nm	G5
XGYT8-18W-AQ	T8	Φ26 × 590 mm	18 W	110/220 V	600-700 nm	G13
XGYT8-30W-AQ	T8	Φ26 × 895 mm	30 W	110/220 V	600-700 nm	G13
XGYT8-40W-PG	T8	Φ26 × 1199 mm	40 W	110/220 V	600-700 nm	G13

Values reproduce the 2017 New Lights catalogue table. The two T8 references ending in -AQ on the plant-growing page are retained exactly as printed and require order-level identity confirmation.

Product Description

Product Details

Product Construction

A sealed glass cylinder contains electrode assemblies. Contact pins project from metal end pieces.

Selection & Installation Notes

Confirm the catalogue code against the drawing. Check pin spacing, cavity clearance and circuit requirements before approving a sample. Compare related options in our professional grow light range.

Recommended Application

Applications

Horticultural Test Fixtures: Install the selected lamp in a compatible enclosed horticultural test fixture.
Controlled-Environment Fixtures: Use matched replacement lamps in suitable indoor controlled-environment luminaires.
Maintenance Relamping: Match the complete reference and fixture configuration when replacing an existing lamp.
OEM Horticultural Equipment: Integrate the approved lamp specification into compatible horticultural lighting equipment.

Keep
in touch

Tell Us Your Market and Product Needs

Share your market, product interest, application, or estimated quantity. Our team can help you move faster from product selection to quotation and sample discussion.

Frequently Asked Questions?

Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.

What is a plant growing fluorescent lamp?

It is a replaceable linear light source designed for use inside a compatible horticultural test fixture or display luminaire.

Can similar-looking plant-growing lamps be interchanged?

Do not assume interchangeability. Match the complete reference, physical fit, holder arrangement and operating gear to the existing equipment.

Are the fixture and control gear included?

No. The product is the replaceable lamp; the canopy or fixture, holders and operating gear are separate components.

How should a replacement lamp be selected?

Use the equipment drawing and approved lamp specification, then verify the complete reference and physical sample before installation.

Does the product name establish a plant-growth result?

No specific germination, biomass, flowering or other plant outcome should be assumed from the product name alone. Define and verify those requirements at equipment and project level.

Does this product name mean the lamp emits UV?

No. Plant-growing use does not by itself establish UV output. Any spectral or UV requirement must be stated and verified in the approved technical specification.