IP44 Photocell GU10 Wall Light
- Ambient-Light Control: The dedicated photocell distinguishes this version from the PIR and standard XGYWL-1411 variants.
- Opposed Lamp Positions: The vertical housing accepts one GU10 lamp at each end for upward and downward light distribution.
- Visible Sensor Position: The photocell sits on the backplate beside the main cylindrical body in the verified mounting orientation.
- Compact Vertical Form: The narrow housing keeps both GU10 positions and the photocell in one wall-mounted assembly.
| Lamp Configuration | GU10 × 2 |
|---|---|
| Lamp Supply | Confirm inclusion and electrical rating per order |
| Control | Ambient-light photocell |
| Housing / Materials | 220 × 68 × 106 mm / ABS + PC or ABS + glass |
|---|---|
| Specified CCT / PF | 3000 K / 0.5 |
| Protection / Electrical Class | IP44 / Class I |
Technical Specifications
Model Specifications
| Model | Dimensions | Lamp Configuration | Control | Specified CCT | PF | Material Options | Protection |
|---|---|---|---|---|---|---|---|
| XGYWL-1411-PHOTOCELL | 220 x 68 x 106 mm | GU10 x 2 | Ambient-light photocell | 3000 K | 0.5 | ABS + PC / ABS + glass | IP44, Class I |
Product Description
Product Details
Product Construction
The 220 × 68 × 106 mm assembly is offered in ABS + PC or ABS + glass material combinations. Its electrical arrangement is Class I, with a power factor of 0.5 and a specified 3000 K lamp schedule.
Selection & Installation Notes
Define whether lamps are included and approve their voltage, wattage, beam and output before ordering. Position the sensing face where it receives representative daylight without direct spill from windows, signs or neighboring luminaires. Preserve upright orientation, protective earth, sealed cable entry and complete IP44 joints, then test switching at the installed position. Compare related housings in our wall light housings range.
Recommended Application
Applications
- Residential Entrances: Provides photocell-controlled upward and downward wall lighting beside sheltered entrance routes.
- Covered Walkways: Supports automatic wall lighting along exterior circulation paths.
- Garage Access: Adds two-direction wall lighting near pedestrian access points.
- Courtyard Walls: Provides upward and downward illumination on exterior wall sections.
in touch
- No.5 Fenghuang Road Qianjiang Industrial Area Dingqiao Town Haining Zhejiang 314413 China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Frequently Asked Questions?
Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.
Lamp inclusion is an order choice. Specify whether two GU10 lamps are required and approve their electrical ratings, beam and output before production.
The photocell switches the two GU10 lamps in response to ambient light. Confirm the switching threshold and delay on the approved operating sample.
Yes. Spill from the fitting, windows, signs or adjacent luminaires can alter when the light switches, so check the sensor position at the installation site.
The PHOTOCELL version responds to ambient light. The separate XGYWL-1411-PIR version uses motion detection, so the two models serve different control requirements.
Provide the protective-earth connection specified for Class I equipment and follow the approved local wiring and cable-entry method.
Use it only where the installed exposure is suitable for IP44. Maintain the intended wall orientation, cable-entry seal and enclosure assembly, and avoid immersion or persistent water jets.


